English
Language : 

AA20140 Datasheet, PDF (1/2 Pages) Astec America, Inc – 120 Watts
120 Watts
AA20140 Series
Total Power: 70-120 Watts
Input Voltage: 85-264 VAC
# of Outputs: Quad
Special Features
• Active power factor correction
• EN61000-3-2 compliance
• Remote sense on outputs one and two
• Industry-standard 4.25” x 7” footprint
• Adjustable main outputs
• Built-in Class B EMI filter
• Overvoltage protection
• Overload protection
• Thermal overload protection
Environmental
Operating temperature: 0° to 50°C ambient; derate
each output at 2.5% per degree from 50° to 70°C
Electromagnetic susceptibility: Designed to meet
EN61000-4, -2, -3, -4, -5, -6, Level 3
Humidity: Operating; non-condensing
20% to 90%
Vibration: 5-32 Hz sinewave .02” double amplitude
32-2 kHz sinewave 1 G peak
Storage temperature: -40° to 85°C
Temperature coefficient: ±.04% per °C
MTBF per mil std 217E: >200,000 hours at full load
and 30°C ambient conditions and full load
Electrical Specs
Input
Input range
Frequency
Inrush current
Efficiency
EMI filter
Power factor
Safety ground
Leakage current
Output
Maximum power
Adjustment range
Hold-up time
Overload protection
Overvoltage protection
Remote sense
90-264 VAC
47-63 Hz
40 A max., cold start @ 25°C
65% typical at full load
FCC Class B conducted and radiated,
CISPR 22 Class B conducted and
radiated, EN55022 Class B
conducted and radiated, VDE 0878
PT3 Class B conducted and radiated.
0.99 typical
<2 mA @ 50/60 Hz, 254 VAC input
70 W convection; 120 W with 30
CFM forced air
±5% minimum on 3.3 V and 5 V
outputs
15 ms @ 120 W load, 115 VAC input
Short circuit protection on all
outputs. Case overload protected @
110-145% above peak rating
3.3 V output: 4.25 V ±.25 V
5 V output: 6.25 V ±.75 V, 20-35%
above nominal output. Latching
type recycle AC to reset.
Compensates for 0.5 V lead drop
min. Will operate without remote
sense connected.
Safety
TUV
EN60950
9837006
UL
UL1950
E186249
CUL
CSA 22.2-234 Level 3
E186249
CB
Certificate and report DE2-002056
CE
Mark (LVD)
110044 America’s (USA): 1-888-41-ASTEC
Europe (UK): 44 (1384) 842-211 Asia (HK): 852-2437-9662