PD-SSI-24VDC-G24V Datasheet, PDF (1/3 Pages) ASM GmbH – Digital Process Meter for Sensors with SSI output

PRODIS^®
PD-SSI
Digital Process Meter for Sensors with SSI output
• For POSICHRON^® position sensors with SSI output
• Integrated sensor supply
• 6-digit LED display
• RS-232 interface
• Easy programming
Description
Specifications
PRODIS-SSI is designed for use with SSI position sensors to display angle and displace-
ment. Via the CLOCK lines, a sequence of pulses will be transmitted, the input DATA lines
will read the sensor´s serial bit sequence. The meter is programmable to display values
within preset start/end range or values in units as inches, mm or degrees. A tare function or
programming lock can be activated with two control terminals.
Sensor excitation is supplied by the meter. With four membrane keys, all parameters can be
programmed for the special applications.
Display
Sampling rate
Excitation voltage/current
Sensor excitation
Inputs
Output
Control inputs
Connection
Operating temperature
Storage temperature
Weight
6-digit, 7-segment LED, 14 mm high,
decimal point programmable
100/s
24 V DC ±10%/150 mA, residual ripple 1%_PP;
85-250 V AC, 50-60 Hz/180 mA max.
24 V DC/300 mA or 5 V DC/800 mA
DATA, DATA (RS422)
CLOCK, CLOCK (RS422)
2 control inputs 24 V, active low
Terminal strip 12-pole, excitation 3-pole
-10 ... +40 °C
-20 ... +85 °C
24 V DC: approx. 250 g; 230 V AC: approx. 400 g
Order Code PRODIS-SSI
Model name
Excitation Voltage
24VDC = 24 V DC
230VAC = 85...250 V AC
Sensor Excitation
G24V = 24 V DC
G5V = 5 V DC
Options
DT = Desktop version
PD-SSI
Order example: PD - SSI - 230VAC - G24V
84
CAT-PC-E-08
www.asm-sensor.com
ASM GmbH