PCST27 Datasheet, PDF (1/21 Pages) ASM GmbH – Rod-Style Design with Analog Output

POSICHRON^®
PCST27
Rod-Style Design with Analog Output
POSICHRON^® rod-style position sensor
• For hydraulic cylinders, fluid level measurement
• Protection class IP68/IP69K, underwater capability
• Pressure-proof up to 15 bar
• Waterproof cable seal
• Measurement range 0 ... 100 to 0 ... 5750 mm
• Absolute position measurement
• Contactless
• Seawater-proof
• Analog output
Specifications
Output
Resolution
Sampling rate
Linearity
Repeatability
Housing material
Mounting
Working pressure
Protection class
Shock
Vibration
Connection
EMC, temperature
Voltage
Current
Essentially infinite
Up to 1 kHz, depending on the measurement range
Ranges >500 mm: L10 = ±0.10 % f.s.
L02 = ±0.02 % f.s.
Ranges ≤500 mm: L10 = ±0.5 mm
L02MM = ±0.2 mm
±3 µm
Stainless steel 1.4404
Thread M18x1,5 / thread ¾ inch
400 bar, other values on request
IP68/IP69K (permanent pressure-proof up to 15 bar)
EN 60068-2-27:2010, 50 g 11 ms, 100 shocks
EN 60068-2-6:2008, 20 g 10 Hz-2 kHz, 10 cycles
Cable 2 m
Refer to output specification
Order code PCST27
1 channel
Model name
Mounting
M18 = Thread M18 x 1,5
Z3/4 = Thread ¾"-16UNF
PCST27
Measurement range (in mm)
100 ... 5750 (in 10 mm increments)
other lengths upon request
Output
U1 = 0 ... 10 V signal conditioner
U1/H = U1 with Alarm_HOLD (see page 16)
U2 = 0.5 ... 10 V signal conditioner
U2/U; U2/H = U2 with Alarm_LOW; U2 with Alarm_HOLD (see page 16)
U8 = 0.5 ... 4.5 V signal conditioner
U8/U; U8/H = U8 with Alarm_LOW; U8 with Alarm_HOLD (see page 16)
I1 = 4 ... 20 mA signal conditioner (3 wire)
I1/U; I1/H = I1 with Alarm_LOW; I1 with Alarm_HOLD (see page 16)
Function and characteristics output
P1A = Position Magnet 1, increasing
P1D = Position Magnet 1, decreasing
PMU = Start value, direction & end value adjustable by the customer
Linearity
L02 / L02MM / L10 (for definition see "Specifications" above)
Connection
KAB2M = Cable, standard length 2 m, other lengths upon request
DB-PCST27-E-2013-11/0.1.0
1/21
www.asm-sensor.com
© ASM GmbH
[e-mail]