NMG2-2500-P Datasheet, PDF (1/2 Pages) ASM GmbH – Stop-Time Measuring System

NMG2
Stop-Time Measuring System
Specifications
Printer Material
Processor Controlled Measuring System for Machine
Safety Measurements according to DIN EN 99
· Portable and solid equipment, built-in matrix printer
· Free adjustable stop point
· Standstill detection down to v < 1 mm/s
· Measurement of maximum velocity
· Measurement of velocity at stop point
· ISO9000 calibration certificate
· Traceability of measurement values
· RS-232 interface for PC connection
· Fast set-up time
· Actuator to release no-touch safety equipment as
option
Measurement Function Stop-Time
Measurement Range
Resolution
Accuracy of Time Base
Stability of Time Base (Temperature)
Relay Compensation
Standstill Detection
Measurement Function Position
Measurement Range
Determination of Stop Point
Resolution of Measuring Device
Resolution of Sensor
Accuracy
Influence of Temperature
Measurement Function Velocity
Measurement Range
Resolution
Accuracy
0 ... 5000 ms
1 ms
0.5 ms -0,05 %
±50 ppm / K
Time delay of release contact will be
compensated at every measurement
v < 10 mm/s
0 ... +2500 mm (Standard)
-9999 ... +9999 mm (Maximum)
Sensor Measurement Range up to 30000 mm
-9999 ... 9999 mm
1 mm (with Printer Option: 0.1 mm)
25 µm
±0.05 % Full Scale ±1 Digit
±0.005 % Full Scale / K
-9999 ... +9999 mm/s
2,5 mm/s
±2,5 mm/s
Printer Paper, 1 roll
Printer Ribbon, 1 piece
NMG2-DP
NMG2-DF
Order Code NMG2
Model Name
NMG2 - 2500
Option Printer
P = Built-in matrix printer
Delivery of the NMG2 complete with sensor WS2.1, magnetic clamp and connector cables.
76
CAT-POS-E-2001
Order Example: NMG2 - 2500 - P
ASM