AX88782 Datasheet, PDF (14/20 Pages) ASIX Electronics Corporation – ASIX Multi-Port Ethernet Controller

ASIX Multi-Port Ethernet Controller
Product Introduction
6-4. AX88613 Demo Board
The following is the picture of AX88613 demo board for your reference.
Figure 14. AX88613 Demo Board
The following are the jumper configuration table of the AX88613 demo board.
Jumper
JP1
J2, J3
J4
J6
Setting
JP1(1,3)
Open
Open
Short
Short
JP1(2,4)
Open
Short
Open
Short
Open (Default)
Short
Open (Default)
Short
Description
Select EEPROM Type
None
93C46
93C56
93C66 (Default)
MII/Rev-MII/RMII/Rev-RMII interface connector
No supply 50MHz reference clock from TX_CLK
(pin #54) to RX_CLK (pin #71)
Supply 50MHz reference clock from TX_CLK
(pin #54) to RX_CLK (pin #71) for RMII or
Rev-RMII mode
No supply 5V power source to J3 MII interface
connector
Supply 5V power source to J3 MII interface
connector
Figure 15. AX88613 Demo Board Jumper Setting Table
14
Copyright (C) 2008-2009 Reserved by ASIX Electronics Corporation