English
Language : 

AX88780 Datasheet, PDF (1/49 Pages) ASIX Electronics Corporation – High-Performance Non-PCI Single-Chip 32-bit 10/100M Fast Ethernet Controller
AX88780
High-Performance Non-PCI Single-Chip
32-bit 10/100M Fast Ethernet Controller
Document No: AX88780/V1.0/10/4/05
Features
● High-performance non-PCI local bus
Support back-pressure flow control for half-duplex
16/32-bit SRAM-like host interface
operation
Support big/little endian data bus type
Support packet length set by software
Large embedded SRAM for packet buffers
Support optional MII interface for Ethernet PHY
32K bytes for receive buffer
and HomePNA/HomePlug PHY applications
8K bytes for transmit buffer
● Support Wake-on-LAN function by following events
Support IP/TCP/UDP checksum offloads
Detection of a change in the network link state
Support interrupt with high or low active trigger
Receipt of a Magic Packet
mode
● Support optional EEPROM interface
● Single-chip Fast Ethernet controller
● Support PCMCIA in 16-bit mode
Compatible with IEEE802.3, 802.3u standards
● Support system reference clock from 40MHz to
Integrated Fast Ethernet MAC/PHY transceiver in 100MHz
one chip
● Support LED pins for various network activity
Support 10Mbps and 100Mbps data rate
indications
Support full and half duplex operations
● Integrated voltage regulator and 25MHz crystal
Support 10/100Mbps N-way Auto-negotiation oscillator
operation
● 3.3V power supply with 5V I/O tolerance
Support IEEE 802.3x flow control for full-duplex ● 128-pin LQFP with CMOS process, RoHS package
operation
● US patent approved
Product Description
The AX88780 is a high-performance and cost-effective single-chip Fast Ethernet controller for various embedded
systems including consumer electronics and home network markets that require a higher level of network connectivity.
The AX88780 supports 16/32-bit SRAM-like host interface and integrates on-chip Fast Ethernet MAC and PHY, which
is IEEE802.3 10Base-T and IEEE802.3u 100Base-T compatible. The AX88780 supports full-duplex or half-duplex
operation at 10/100Mbps speed with auto-negotiation or manual setting. The AX88780 integrates large embedded SRAM
for packet buffers to accommodate high bandwidth applications and supports IP/TCP/UDP checksum to offload
processing loading from microprocessor/microcontroller in an embedded system.
System Block Diagram
Always contact ASIX for possible updates before starting a design.
This data sheet contains new products information. ASIX ELECTRONICS reserves the rights to modify product
specification without notice. No liability is assumed as a result of the use of this product. No rights under any patent
accompany the sale of the product.
ASIX ELECTRONICS CORPORATION
4F, NO.8, Hsin Ann Rd., Science-Based Industrial Park, Hsin-Chu City, Taiwan, R.O.C.
TEL: 886-3-579-9500
FAX: 886-3-579-9558
Released Date: 10/4/2005
http://www.asix.com.tw/