DS-0094 Datasheet, PDF (1/4 Pages) All Sensors Corporation – Millivolt Output Pressure Sensors

Millivolt Output Pressure Sensors
C-Grade
Pressure Sensors
Features
• 0 to 0.3 PSI to 0 to 100 PSI Pressure Ranges
• 1 % linearity version
• Temperature Compensated
• Calibrated Zero and Span
General Description
Applications
• Medical Instrumentation
• Environmental Controls
• HVAC
The Millivolt Output pressure sensors is based upon a proprietary packaging technology to reduce output offset or
common mode errors. This model provides a calibrated millivolt output with good output offset characteristics. In
addition the sensor utilizes a silicon, micromachined, stress concentration enhanced structure to provide a very
linear output to measured pressure.
These calibrated and temperature compensated sensors give an accurate and stable output over a wide
temperature range. This series is intended for use with non-corrosive, non-ionic working fluids such as air, dry
gases and the like. The C-GRADE is a lowest cost version of the millivolt output pressure sensors.
The output of the device is ratiometric to the supply voltage and operation from any D.C. supply voltage up to
+16 V is acceptable.
Physical Dimensions
0.25
(6.4)
1.08
(27.4)
Pin Size
0.010 x 0.020
(0.25 x 0.50)
0.174 to 0.190
(4.4 to 4.8)
0.10
Typical
(2.54)
Pin 1 2 3 4 5 6
1
0.21
(5.3)
A
0.66
(16.0)
B
0.42
(10.5)
0.48
(12.2)
0.55
(14.0)
NOTES:
1) Dimensions in inches (millimeters)
0.80
(20.3)
0.85
(21.6)
1.10
(27.9)
All Sensors
DS-0094 Rev A
pin 1: N/C
pin 2: +V supply
pin 3: +Voutput
pin 4: -Vsupply
pin 5: -Voutput
pin 6: N/C