DS-0041 Datasheet, PDF (1/3 Pages) All Sensors Corporation – Barometrici Pressure Sensors

barometric pressure sensors
Barometrici Pressure Sensors
600 to 1,100 mbar Barometric Pressure
General Description
Options:
• Ratiometric Output
• Fixed 4V Output with internal Voltage Reference
• Temperature Compensated (-25C to 85C, -40C to 125C, 5 C
to 50C)
• Calibrated Zero and Span
Applications
• Medical Instrumentation
• Environmental Controls
• Chemical Analysis
These Barometric pressure sensors are based upon a proprietary package technology to reduce errors. This
model provides a fixed 4-volt output with superior output characteristics. The sensor housing has been designed
specifically to reduce package induced parasitic stress and strain. In addition the sensor utilizes a silicon,
micromachined (MEMS) structure to provide a very linear output to measured pressure. The sensor embodies a
vacuum reference.
These calibrated and temperature compensated sensors give an accurate and stable output over a wide
temperature range. Each sensor is internally compensated using an ASIC compensation technique. This series is
intended for use with non-corrosive, non-ionic working fluids such as air, dry gases and the like.
Physical Dimensions
all sensors
DS-0041 Rev A
01