1PSI-D-HGRADE-MV Datasheet, PDF (1/5 Pages) All Sensors Corporation – Millivolt Output Pressure Sensors

Millivolt Output Pressure Sensors
H-Grade
Pressure Sensors
Features
• 0 to 4” H2O to 0 to 100 PSI Pressure Ranges
• 0.5 % linearity...high accuracy version
• Temperature Compensated
• Calibrated Zero and Span
Applications
• Medical Instrumentation
• Environmental Controls
• HVAC
General Description
The Millivolt Output pressure sensors is based upon a proprietary packaging technology to reduce output offset or common mode
errors. This model provides a calibrated millivolt output with excellent output offset characteristics. In addition the sensor utilizes a
silicon, micromachined, stress concentration enhanced structure to provide a very linear output to measured pressure.
These calibrated and temperature compensated sensors give an accurate and stable output over a wide temperature range. This
series is intended for use with non-corrosive, non-ionic working fluids such as air, dry gases and the like. The H-GRADE is a high
accuracy version of the millivolt output pressure sensors.
The output of the device is ratiometric to the supply voltage and operation from any D.C. supply voltage up to +16 V is acceptable.
Physical Dimensions
Equivalent Circuit
0.25
(6.4)
1.08
(27.4)
Pin Size
0.010 x 0.020
(0.25 x 0.50)
0.174 to 0.190
(4.4 to 4.8)
0.10 Typical
(2.54)
Pin 1 2 3 4 5 6
1
0.21
(5.3)
A
0.66
(16.0)
B
0.42
(10.5)
0.48
(12.2)
0.55
(14.0)
NOTES:
1) Dimensions in inches (millimeters)
0.80
(20.3)
0.85
(21.6)
1.10
(27.9)
Pinout ^{(note 1)}
pin 1: N/C
pin 2: +V supply
pin 3: +Voutput
pin 4: -Vsupply
pin 5: -Voutput
pin 6: N/C
+Vs upply
-Vout
+Vout
-Vs upply
Input Resittance
20 k ohm
Output Resistance
3.0 k ohm
Approvals
MKT
DATE MFG
DATE ENG
DATE QA
DATE
As Is
With Change
As Is
All Sensors
With Change
As Is
With Change
DS-0095 Rev C
As Is
With Change