0.3PSI-G-4VPRIME-ND Datasheet, PDF (1/6 Pages) All Sensors Corporation – industrial Temperature Grade

Amplified Middle Pressure Sensors
Industrial Temperature Grade
Features
• 0 to 0.3 psi to 0 to 100 psi Pressure Ranges
• Ratiometric 4V Output
• Temperature Compensated (-25C to 85C)
• Calibrated Zero and Span
General Description
Applications
• Medical Instrumentation
• Environmental Controls
• HVAC
The Amplified line of middle pressure sensors is based upon a proprietary package technology to reduce errors. This model provides
a ratiometric 4-volt output with superior output characteristics. The sensor housing has been designed specifically to reduce package
induced parasitic stress and strain. In addition the sensor utilizes a silicon, micromachined, stress concentration enhanced structure to
provide a very linear output to measured pressure.
These calibrated and temperature compensated sensors give an accurate and stable output over a wide temperature range. Each sensor
is internally compensated using an ASIC compensation technique. This series is intended for use with non-corrosive, non-ionic working
fluids such as air, dry gases and the like.
The output of the device is ratiometric to the supply voltage over a supply voltage range of 4.5 to 5.5 volts.
Physical Dimensions
8.74
0.344
2.54
0.100
(Typ)
Port 0.179"/0.189" _{Pin 1 Identifier}
CL 1.27
0.050
0.020" x 0.010" Pin
0.30" minimum length
Port A
12.19
0.480
13.97
0.550
3.56
0.140
3.18
R0.125
Port B
20.32
0.800
21.59
0.850
pin 1: Vs
pin 2: Gnd
pin 3: Vout
pin 4: do not connect
Approvals
MKT
DATE MFG
DATE ENG
As Is
With Change
As Is
With Change
As Is
All Sensors
DS-0029 Rev C
DATE QA
With Change
As Is
DATE
With Change