0.3PSI-G-4V-MIL-ND Datasheet, PDF (1/4 Pages) All Sensors Corporation – Military Temperature Grade

Amplified Middle Pressure Sensors
0.3 psi to 15 psi Pressure Sensors
Military Temperature Grade
Features
• 0 to 0.3 psi to 0 to 15 psi Pressure Ranges
• Ratiometric 4V Output
• Temperature Compensated (-40C to 125C)
• Calibrated Zero and Span
General Description
Applications
• Medical Instrumentation
• Environmental Controls
• HVAC
The Amplified line of middle pressure sensors is based upon a proprietary package technology to reduce errors.
This model provides a ratiometric 4-volt output with superior output characteristics. The sensor housing has been
designed specifically to reduce package induced parasitic stress and strain. In addition the sensor utilizes a
silicon, micromachined, stress concentration enhanced structure to provide a very linear output to measured
pressure.
These calibrated and temperature compensated sensors give an accurate and stable output over a wide
temperature range. Each sensor is internally compensated using an ASIC compensation technique. This series is
intended for use with non-corrosive, non-ionic working fluids such as air, dry gases and the like.
The output of the device is ratiometric to the supply voltage over a supply voltage range of 4.5 to 5.5 volts.
Physical Dimensions
0.25
(6.4)
1.08
(27.4)
Pin Size
0.010 x 0.020
(0.25 x 0.50)
0.174 to 0.190
(4.4 to 4.8)
0.66
(16.0)
0.10 Typical
(2.54)
Pin 1 2 3 4
1
0.21
(5.3)
A
0.42
(10.5)
B
pin 1: Vsupply
pin 2: Common
pin 3: Voutput
pin 4: do not connect
0.48
(12.2)
0.55
(14.0)
NOTES:
1) Dimensions in inches (millimeters)
All Sensors
0.80
(20.3)
0.85
(21.6)
1.10
(27.9)
DS-0031 Rev A