IC-LSHB_17 Datasheet, PDF (3/9 Pages) IC-Haus GmbH – INCREMENTAL PHOTOSENSOR ARRAY

iC-LSHB
INCREMENTAL PHOTOSENSOR ARRAY
PIN CONFIGURATION
oBGA LSH2C (6.2 mm x 5.2 mm)
1 234
A
B
C
D
Rev D1, Page 3/9
PIN FUNCTIONS
No. Name Function
A2 NCOS Cosine -
A3 PCOS Cosine +
A4 NZ Reference Voltage Output
B1 GND Ground
B2 NSIN Sine -
B3 PSIN Sine +
B4 VCC +4.1...5.5 V Supply Voltage
C1 PZ Zero Signal (Index)
NB: All outputs supply analog voltages.
C2 n.c.¹⁾
C3 n.c.
C4 n.c.
D1 n.c.
D2 n.c.
D3 n.c.
D4 n.c.
PIN CONFIGURATION
oQFN32-5x5 (5 mm x 5 mm)
32 31 30 29 28 27 26 25
1
24
2
23
3
22
4
21
5
20
6
19
7
18
8
17
PIN FUNCTIONS
No. Name Function
1 n.c.¹⁾
2 VCC +4.1..5.5 V Supply Voltage
3 PZ Zero Signal (Index)
4 NZ Reference Voltage Output
5 GND Ground
6-19 n.c.¹⁾
20 NCOS Cosine -
21 PCOS Cosine +
22 NSIN Sine -
23 PSIN Sine +
24-32 n.c.¹⁾
BP ²⁾ Backside paddle
NB: All outputs supply analog volt-
ages.
9 10 11 12 13 14 15 16
IC top marking: <P-CODE> = product code, <A-CODE> = assembly code (subject to changes);
1) Pin numbers marked n.c. are not connected.
2) Connecting the backside paddle is recommended by a single link to GND (use as shield). A current flow across the paddle is not permissible.