ASW235 Datasheet, PDF (1/7 Pages) Advanced Semiconductor Business Inc. – MMIC Amplifier

ASW235
5 ~ 6000 MHz MMIC Amplifier
Features
 19.5 dB Gain at 2 GHz
 18 dBm P1dB at 2 GHz
 30.5 dBm Output IP3 at 2 GHz
 3.5 dB NF at 2 GHz
 MTTF > 100 Years
 Single Supply
Description
The ASW235, a power amplifier MMIC, has a high
linearity, high gain, and high efficiency over a wide
range of frequency, being suitable for use in both
receiver and transmitter of telecommunication sys-
tems up to 6 GHz. The amplifier is available in a
SOT363 package and passes through the stringent
DC, RF, and reliability tests.
Typical Performance
(Supply Voltage = +4.65 V, TA = +25 C, Z0 = 50 )
Parameters
Units
Typical
Frequency
MHz
900
2000
Gain
dB
23.0
19.5
S11
dB
-13
-15
S22
Output IP3¹⁾
dB
dBm
-10
-12
29.0
30.5
Noise Figure
dB
3.3
3.5
Output P1dB
dBm
16
18
Current
mA
46
46
Device Voltage
V
+4.65
+4.65
1) OIP3 is measured with two tones at an output power of +0 dBm/tone separated by 1 MHz.
2700
17.5
-18
-12
30.0
3.9
17
46
+4.65
Package Style: SOT363
Application Circuit
 5 ~ 140 MHz
 500 ~ 2700 MHz
 IF
Product Specifications
Parameters
Testing Frequency
Gain
S11
S22
Output IP3
Noise Figure
Output P1dB
Current
Device Voltage
Units
MHz
dB
dB
dB
dBm
dB
dBm
mA
V
Min
Typ
Max
2000
19.5
-15
-12
30.5
3.5
18
46
+4.65
Absolute Maximum Ratings
Parameters
Operating Case Temperature
Storage Temperature
Device Voltage
Operating Junction Temperature
Input RF Power (Continuous)
Rating
-40 to 85 C
-40 to 150 C
+5.5 V
+150 C
22 dBm
* Please find the max. input power data from http://www.asb.co.kr/pdf/Maximum_Input_Power_Analysis.pdf
Pin Configuration
Pin No.
1
2,3,5,6
4
Function
RF OUT & Bias
GND
RF IN
1/7
ASB Inc.  [e-mail]  Tel: [phone]
April 2017