ASW220 Datasheet, PDF (1/12 Pages) Advanced Semiconductor Business Inc. – CATV MMIC Amplifier

ASW220
CATV MMIC Amplifier
Features
_F1_e6_a.8_td_uB_reG_sain at 500 MHz
 18.5 dBm P1dB at 500 MHz
 37 dBm Output IP3 at 500 MHz
 3.4 dB NF at 500 MHz
 75  Input & Output Match
 Bandwidth 5 ~ 1200 MHz
 Single Supply +5 V
Description
T_Dhe_esA_cSW_ri2_p2_t0_i,_oa_nwideband linear amplifier MMIC,
has a high linearity and low noise over a wide range
of frequency 5 MHz to 3 GHz, being suitable for use
in the fiber receiver, distribution amplifiers and drop
amplifiers of CATV systems, and in the mobile wire-
less repeaters and BTS. The amplifier is available in
a SOT89 package and passes through the stringent
DC, RF, and reliability tests.
Typical Performance
(Supply Voltage = +5 V, TA = +25 C, Z0 = 75 )
Parameters
Units
Typical
Frequency
MHz
5
50
500
860
1200 2100
Noise Figure
dB
3.3
3.3
3.4
3.4
3.4
4.2
Gain
dB
16.9 17.0 16.8 16.7 16.0 15.7
S11
dB
-20
-20
-20
-16
-17
-12
S22
dB
-20
-20
-18
-18
-16
-10
Output P1dB
dBm
17.5 18.0 18.5 17.0 17.0 16.5
Output IP3¹⁾
Output IP2^1),2)
dBm
dBm
36.0 36.5 37.0 32.0 31.5 29.5
47
48
48
42
45
35
CSO³⁾
dBc
60
CTB³⁾
dBc
75
Current
mA
75
90
Device Voltage
V
+5
+5
1) OIP3 and OIP2 are measured with two tones at an output power of +5 dBm/tone separated by 1 MHz (up-link) or 6 MHz (down-link).
2) OIP2 is measured at F1+F2 Frequency.
3) 60 channels, +28 dBmV per channel (measured at output).
Product Specifications
Parameters
Testing Frequency
Gain
S11
S22
Output IP3
Noise Figure
Output P1dB
Current
Device Voltage
Units
MHz
dB
dB
dB
dBm
dB
dBm
mA
V
Min
Typ.
Max
500
16.8
-20
-18
37
3.4
18.5
75
+5
Absolute Maximum Ratings
Parameters
Operating Case Temperature
Storage Temperature
Device Voltage
Operating Junction Temperature
Input RF Power (Continuous)*
Thermal Resistance
Rating
-40 to 85 C
-40 to 150 C
+6 V
+150 C
+25 dBm
158 C/W
* Please find the max. input power data from http://www.asb.co.kr/pdf/Maximum_Input_Power_Analysis.pdf
ASW220
Package Style: SOT89
Application Circuit
 CATV & 50 ~ 1000 MHz
 CATV & 50 ~ 1200 MHz
 CATV & 5 ~ 200 MHz
 SMATV & 900 ~ 2100 MHz
 SMATV & 200 ~ 3000 MHz
 5000 ~ 6000 MHz
Pin Configuration
Pin No.
1
2
3
Function
RF IN
GND
RF OUT & Bias
1/12
ASB Inc.  [e-mail]  Tel: [phone]
June 2017