ASL560 Datasheet, PDF (1/12 Pages) Advanced Semiconductor Business Inc. – Wideband Linear Amplifier MMIC

ASL560
Wideband Linear Amplifier MMIC
Features
 17.9 dB Gain at 500 Mz
 25 dBm P1dB at 500 MHz
 42.5 dBm Output IP3 at 500 MHz
 1.5 dB NF at 500 MHz
 75  Input & Output Match
 Bandwidth 5 ~ 1200 MHz
 Single Supply
Description
The ASL560, a wideband linear amplifier MMIC,
has a high linearity and low noise over a wide range
of frequency 5 MHz to 2.6 GHz, being suitable for
use in the fiber receiver, distribution amplifiers and
drop amplifiers of CATV systems, and in the mobile
wireless repeaters and BTS. The amplifier is availa-
ble in a SOT89 package and passes through the
stringent DC, RF, and reliability tests.
ASL560
Package Style: SOT89
Typical Performance
(Supply Voltage = +8 V, TA = +25 C, Z0 = 75 )
Parameters
Units
Typical
Frequency
MHz
5
50
500
860
1200 1500
Noise Figure
dB
2.1
1.4
1.5
1.6
1.9
2.0
Gain
dB
18.0
17.8 17.9 17.6 16.2 17.1
S11
dB
-11
-13
-14
-12
-12
-7
S22
dB
-10
-17
-16
-17
-12
-11
Output P1dB
dBm
24.0
24.5 25.0 23.5 23.5 20.5
Output IP3¹⁾
Output IP2^1),2)
dBm
dBm
40.0
43.0 42.5 36.5 39.0 40.0
53
54
52
66
51
52
CSO³⁾
dBc
60
CTB³⁾
dBc
75
Current
mA
120
Device Voltage
V
+8
1) OIP3 and OIP2 are measured with two tones at an output power of +10 dBm/tone separated by 1 MHz (up-link) or 6 MHz(down-link).
2) OIP2 is measured at F1+F2 Frequency.
3) 60 channels, +36 dBV per channel (measured at output).
Product Specifications
Parameters
Testing Frequency
Gain
S11
Units
MHz
dB
dB
Min
Typ.
Max
500
17.0
17.9
-12
-14
S22
dB
-14
-16
Output IP3
Noise Figure
Output P1dB
Current
Device Voltage
dBm
dB
dBm
mA
V
39.0
42.5
1.5
1.8
24
25
100
120
142
+8
Absolute Maximum Ratings
Parameters
Operating Case Temperature
Storage Temperature
Device Voltage
Operating Junction Temperature
Input RF Power (CW, 75  matched)*
Maximum Current
Thermal Resistance
Rating
-40 to 85 C
-40 to 150 C
+9V
+150C
+4 dBm
220 mA
43 C/W
Application Circuit
 50 ~ 1000 MHz
 50 ~ 1200 MHz
 5 ~ 200 MHz
 950 ~ 1500 MHz
(SMATV & EOC)
 800 ~ 2500 MHz
 50 ~ 1000 MHz
(Push-Pull, 1:1 transformer)
 50 ~ 1200 MHz
(Push-Pull, 1:1 transformer)
 5 ~ 200 MHz
(Push-Pull, 1:1 transformer)
Pin Configuration
Pin No. Function
1
RF IN
2
GND
3
RF OUT & Bias
1/12
ASB Inc.  [e-mail]  Tel: [phone]
June 2017