ASL380_17 Datasheet, PDF (1/13 Pages) Advanced Semiconductor Business Inc. – Wideband Linear Amplifier MMIC

ASL380
Wideband Linear Amplifier MMIC
Features
 19.2 dB Gain at 500 MHz
 22 dBm P1dB at 500 MHz
 41.5 dBm Output IP3 at 500 MHz
 1.6 dB NF at 500 MHz
 75  Input & Output Match
 Bandwidth 5 ~ 1200 MHz
 Single Supply +5 V
Description
The ASL380, a wideband linear amplifier MMIC,
has a high linearity and low noise over a wide range
of frequency 5 MHz to 2.6 GHz, being suitable for
use in the fiber receiver, distribution amplifiers and
drop amplifiers of CATV systems, and in the mobile
wireless repeaters and BTS. The amplifier is availa-
ble in a SOT89 package and passes through the
stringent DC, RF, and reliability tests.
Typical Performance
(Supply Voltage = +5 V, TA = +25 C, Z0 = 75 )
Parameters
Units
Typical
Frequency
Noise Figure
Gain
S11
S22
Output P1dB
Output IP3
Output IP2^1),2),3)
CSO⁴⁾
CTB⁴⁾
MHz
dB
dB
dB
dB
dBm
dBm
dBm
dBc
dBc
5
1.5
21.0
-20
-20
21.0
41.0¹⁾
53
60
> 70
50
1.3
19.6
-15
-16
21
41.0¹⁾
58
500
1.6
19.2
-12
-18
22
41.5¹⁾
63
860
1.7
18.8
-12
-16
22
41.5¹⁾
49
1200
1.7
17.1
-15
-15
22.0
40.5²⁾
53
2150
1.9
16.8
-11
-13
20
39.0¹⁾
52
Current
mA
110
Device Voltage
V
+5
1) OIP3 and OIP2 are measured with two tones at an output power of +5 dBm/tone separated by 1 MHz(up-link) or 6 MHz(down-link).
2) OIP3 and OIP2 are measured with two tones at an output power of +8 dBm/tone separated by 1 MHz
3) OIP2 is measured at F1+F2 Frequency.
4) Pout = 95 dBuV for 84 channels VHF signal.
Product Specifications
Parameters
Units
Min
Typ.
Max
Testing Frequency
MHz
500
Gain
dB
19.2
S11
dB
-12
S22
dB
-18
Output IP3
dBm
41.5
Noise Figure
dB
1.6
Output P1dB
dBm
22
Current
mA
110
Device Voltage
V
+5
Absolute Maximum Ratings
Parameters
Operating Case Temperature
Storage Temperature
Device Voltage
Operating Junction Temperature
Input RF Power (CW, 75  matched)
Maximum Current
Thermal Resistance
Rating
-40 to 85 C
-40 to 150 C
+6 V
+150 C
+18 dBm
150 mA
43 C/W
1/13
ASB Inc.  [e-mail]  Tel: [phone]
ASL380
Package Style: SOT89
Application Circuit
 CATV & 50 ~ 1000 MHz
 CATV & 50 ~ 1002 MHz
(Positive gain slope)
 CATV & 50 ~ 1200 MHz
 CATV & 5 ~ 200 MHz
 950 ~ 2150 MHz (SMATV)
 50 ~ 1000 MHz
(Push-Pull, 1:1 transformer)
 50 ~ 1200 MHz
(Push-Pull, 1:1 transformer)
 CATV & 50 ~ 1002 MHz
(Min. VSWR)
Pin Configuration
Pin No. Function
1
RF IN
2
GND
3
RF OUT & Bias
June 2017