ASL330_17 Datasheet, PDF (1/10 Pages) Advanced Semiconductor Business Inc. – Wideband Linear Amplifier MMIC

ASL330
Wideband Linear Amplifier MMIC
Features
 16.4 dB Gain at 500 MHz
 21 dBm P1dB at 500 MHz
 41 dBm Output IP3 at 500 MHz
 1.7 dB NF at 500 MHz
 75  Input & Output Match
 Bandwidth 5 ~ 1200 MHz
 Single Supply +5 V
Description
The ASL330, a wideband linear amplifier MMIC,
has a high linearity and low noise over a wide range
of frequency 5 MHz to 2.6 GHz, being suitable for
use in the fiber receiver, distribution amplifiers and
drop amplifiers of CATV systems, and in the mobile
wireless repeaters and BTS. The amplifier is availa-
ble in a SOT89 package and passes through the
stringent DC, RF, and reliability tests.
Typical Performance
(Supply Voltage = +5 V, TA = +25 C, Z0 = 75 )
Parameters
Units
Typica
Frequency
Noise Figure
Gain
S11
S22
MHz
dB
dB
dB
dB
5
50
500
860
1.7
1.8
1.7
1.8
16.5 17.2 16.4
15.9
-12
-20
-20
-18
-14
-18
-20
-17
Output P1dB
Output IP3
Output IP2^{1), 2), 3),}
CSO⁵⁾
CTB⁵⁾
dBm
dBm
dBm
dBc
dBc
20.0
39.5¹⁾
51
66
76
21.0
41.0²⁾
54
21.0
41.0²⁾
56
19.5
37.0²⁾
50
Current
mA
105
Device Voltage
V
+5
1) OIP3 and OIP2 are measured with two tones at an output power of +8 dBm/tone separated by 1 MHz.
2) OIP3 and OIP2 are measured with two tones at an output power of +5 dBm/tone separated by 6 MHz.
3) OIP2 is measured at F1+F2 Frequency.
4) 160 channels, +20 dBmV per channel (measured at output).
Product Specifications
Parameters
Units
Min
Typ.
Testing Frequency
MHz
500
Gain
dB
16.4
S11
dB
-20
S22
dB
-20
Output IP3
dBm
41
Noise Figure
dB
1.7
Output P1dB
dBm
21
Current
mA
105
Device Voltage
V
+5
Absolute Maximum Ratings
Parameters
Operating Case Temperature
Storage Temperature
Device Voltage
Operating Junction Temperature
Input RF Power (CW, 75  matched)*
Thermal Resistance
Rating
-40 to 85 C
-40 to 150 C
+6 V
+150 C
+18 dBm
43 C/W
1200
3.1
10.8
-12
-13
21.5
40.0²⁾
65
2200
2.7
14.7
-18
-11
20.0
39.5²⁾
51
Max
ASL330
Package Style: SOT89
Application Circuit
 50 ~ 1000 MHz
(Gain Flatness: 0.3 dB)
 50 ~ 1000 MHz (Min. VSWR)
 50 ~ 1200 MHz
 5 ~ 200 MHz
 150 ~ 2200 MHz (SMATV)
 50 ~ 1000 MHz
(Push-Pull, 1:1 transformer)
 50 ~ 1200 MHz
(Push-Pull, 1:1 transformer)
Pin Configuration
Pin No. Function
1
RF IN
2
GND
3
RF OUT & Bias
1/10
ASB Inc.  [e-mail]  Tel: [phone]
June 2017