ASL13C_17 Datasheet, PDF (1/13 Pages) Advanced Semiconductor Business Inc. – MMIC Amplifier

ASL13C
5 ~ 3000 MHz MMIC Amplifier
Features
Description
 13 dB Gain at 2000 MHz
 22 dBm P1dB at 2000 MHz
 37 dBm OIP3 at 2000 MHz
 0.75 dB NF at 2000 MHz
 MTTF > 100 Years
 Single Supply
The ASL13C is a wideband linear low noise amplifi-
er MMIC, has a low noise and high linearity at low
bias current, being suitable for use in both receiver
and transmitter of telecommunication systems up to
3 GHz. S11 down to –20 dB is easily achieved for
low noise application to provide a good productivity.
The amplifier is available in a SOT363 package and
passes through the stringent DC, RF, and reliability
tests.
Typical Performance
(Supply Voltage = +5 V, TA = +25 C, Z0 = 50 )
Parameters
Units
Typical
Frequency
MHz
824 ~ 960
Gain
dB
18.5
S11
dB
-18
S22
dB
-10
Output IP3¹⁾
dBm
34.5
Noise Figure
dB
0.85
Output P1dB
dBm
22
Current
mA
59
Device Voltage
V
+4.5
1) OIP3 is measured with two tones at an output power of +10 dBm/tone separated by 1 MHz.
1920 ~ 2170
13.0
-16
-10
36.5
0.75
22
59
+4.5
Product Specifications
(Supply Voltage = +5 V, TA = +25 C, Z0 = 50 )
Parameters
Units
Min
Typ
Max
Testing Frequency
MHz
2000
Gain
dB
12
13
S11
dB
-18
S22
dB
-12
Output IP3
dBm
34.5
36.5
Noise Figure
dB
0.75
0.95
Output P1dB
dBm
20
22
Current
mA
59
Device Voltage
V
+4.5
Package Style: SOT363
Application Circuit
 CDMA & GSM
 WCDMA
 TETRA
 IF
 FM, DVB, DMB
 2000 MHz (3.3 V, 59 mA)
 2100 ~ 2400 MHz (5 V, 59 mA)
 IF (30 ~ 600 MHz)
Absolute Maximum Ratings
Parameters
Rating
Operating Case Temperature
-40 to 85 C
Storage Temperature
-40 to 150 C
Device Voltage
+6 V
Operating Junction Temperature
+150 C
Input RF Power
(CW, 50  matched as in 2000 MHz application circuit)*
+22 dBm
Thermal Resistance
184 C/W
* Please find the max. input power data from http://www.asb.co.kr/pdf/Maximum_Input_Power_Analysis.pdf
The max. input power, in principle, depends upon the application frequency and the matching circuit.
1/13
ASB Inc.  [e-mail]  Tel: [phone]
Pin Configuration
Pin No. Function
1
RF IN
4
RF OUT & Bias
2,3,5,6 GND
Please find the max. input power data from Please find
April 2017