ASL09C_13 Datasheet, PDF (1/3 Pages) Advanced Semiconductor Business Inc. – 5 ~ 4000 MHz High Linearity LNA MMIC

ASL09C
5 ~ 4000 MHz High Linearity LNA MMIC
Features
 Same circuit over 800~2700 MHz
 12.8 dB Gain at 1950 MHz
 19.5 dBm P1dB at 1950 MHz
 35 dBm Output IP3 at 1950 MHz
 0.85 dB NF at 1950 MHz
 MTTF > 100 Years
 Single Supply
Description
The ASL09C, a wideband linear low noise amplifier
MMIC, has a low noise and high linearity at low bias
current, being suitable for use in both receiver and
transmitter of telecommunication systems up to 3.5
GHz. S11 down to –18 dB is easily achieved for low
noise application to provide a good productivity. The
amplifier is available in a SOT89 package and passes
through the stringent DC, RF, and reliability tests.
Typical Performance
(Supply Voltage = +5 V, TA = +25 C, Z0 = 50 )
Parameters
Units
Typical
Frequency
MHz
800
1950
Gain
dB
19.7
12.8
S11
dB
-19
-18
S22
dB
-10.5
-9.5
Output IP3¹⁾
dBm
33
35
Noise Figure
dB
0.8
0.85
Output P1dB
dBm
19.5
19.5
Current
mA
51
Device Voltage
V
+4.5
1) OIP3 is measured with two tones at an output power of +5 dBm/tone separated by 1 MHz.
2400
11.2
-18
-11
36
1.05
19.5
2700
10.2
-18
-11
36
1.1
19.5
ASL09C
Package Style: SOT89
Application Circuit
800 ~ 2700 MHz
Product Specifications
Parameters
Testing Frequency
Gain
S11
S22
Output IP3
Noise Figure
Output P1dB
Current
Device Voltage
Units
MHz
dB
dB
dB
dBm
dB
dBm
mA
V
Min
Typ
Max
1950
12.8
-18
-9.5
35
0.85
19.5
51
+4.5
Pin Configuration
Absolute Maximum Ratings
Parameters
Operating Case Temperature
Storage Temperature
Device Voltage
Operating Junction Temperature
Input RF Power (CW, 50ohm matched)*
Rating
-40 to 85 C
-40 to 150 C
+5.5 V
+150 C
+20 dBm
* Please find the max. input power data from http://www.asb.co.kr/pdf/Maximum_Input_Power_Analysis.pdf
Pin No. Function
1
RF IN
2
GND
3
RF OUT & Bias
1/3
ASB Inc.  [e-mail]  Tel: [phone]
September 2012