ASL03S Datasheet, PDF (1/4 Pages) Advanced Semiconductor Business Inc. – 5-4000 MHz High Linearity LNA MMIC

ASL03S
5-4000 MHz High Linearity LNA MMIC
Features
·Same circuit over 800~3500 MHz
·13 dB Gain at 1950 MHz
·19.5 dBm P1dB at 1950 MHz
·35 dBm Output IP3 at 1950 MHz
·0.9 dB NF at 1950 MHz
·MTTF > 100 Years
·Single Supply
Typical Performance
Description
The ASL03S, a wideband linear low noise amplifier
MMIC, has a low noise and high linearity at low bias
current, being suitable for use in both receiver and
transmitter of telecommunication systems up to 3.5
GHz. S11 down to –18 dB is easily achieved for low
noise application to provide a good productivity. The
amplifier is available in an SOT-343 package and
passes through the stringent DC, RF, and reliability
tests.
Parameters
Units
Typical
Frequency
MHz
800 1950 2400
Gain
dB
19.5
13
11.5
S11
dB
-18
-18
-18
S22
Output IP3¹⁾
dB
dBm
-10
-10
-10
32.5
35
35
Noise Figure
dB
0.8
0.9
1.1
Output P1dB
dBm
19.5 19.5 19.5
Current
mA
4.4
4.4
4.4
Device Voltage
V
45
45
45
1) OIP3 is measured with two tones at an output power of +5 dBm/tone separated by 1 MHz.
2700
10.5
-20
-10
35
1.2
19.5
4.4
45
3500
8
-20
-9
36
1.5
19.5
4.4
45
ASL03S
Package Style: SOT-343
Application Circuit
·800 ~ 3500 MHz
·TETRA (380~460MHz)
Product Specifications
Parameters
Testing Frequency
Gain
S11
S22
Output IP3
Noise Figure
Output P1dB
Current
Device Voltage
Units
MHz
dB
dB
dB
dBm
dB
dBm
mA
V
Min
Typ
Max
1950
13
-18
-10
35
0.9
19.5
4.4
45
Absolute Maximum Ratings
Parameters
Operating Case Temperature
Storage Temperature
Device Voltage
Operating Junction Temperature
Input RF Power (CW, 50ohm matched)*
Rating
-40 to +85°C
-40 to +150°C
+5 V
+150°C
20 dBm
* Please find the max. input power data from http://www.asb.co.kr/pdf/Maximum_Input_Power_Analysis.pdf
Pin Configuration
Pin No.
1
2,4
3
Function
RF OUT / Bias
GND
RF IN
1/4
ASB Inc. · [e-mail] · Tel: [phone]
May 2012