ASL03H Datasheet, PDF (1/11 Pages) Advanced Semiconductor Business Inc. – 5 ~ 3500 MHz MMIC Amplifier

ASL03H
5 ~ 3500 MHz MMIC Amplifier
Features
14.2 dB Gain at 2 GHz
18 dBm P1dB at 2 GHz
32.5 dBm Output IP3 at 2 GHz
1.0 dB NF at 2 GHz
MTTF > 100 Years
Single Supply
Typical Performance
Description
The ASL03H, a wideband linear low noise amplifier
MMIC, has a low noise and high linearity at low bias
current, being suitable for use in both receiver and
transmitter of telecommunication systems up to 3.5
GHz. S11 down to –20 dB is easily achieved for low
noise application to provide a good productivity. The
amplifier is available in a SOT363 package and
passes through the stringent DC, RF, and reliability
tests.
(Supply Voltage = +5 V, TA = +25 C, Z0 = 50 )
Parameters
Units
Typical
Frequency
MHz
900
Gain
dB
19.5
S11
dB
-18
S22
Output IP3¹⁾
dB
-14
dBm
31.0
Noise Figure
dB
0.9
Output P1dB
dBm
17.5
Current
mA
36
Device Voltage
V
+4.3
1) OIP3 is measured with two tones at an output power of +0 dBm/tone separated by 1 MHz.
2000
14.2
-20
-12
32.5
1.0
18.0
36
+4.3
Package Style: SOT363
Application Circuit
10 ~ 88 MHz
30 ~ 500 MHz(3.3 V)
800 ~ 3500 MHz
400 ~ 500 MHz
800 ~ 1000 MHz
1600 ~ 2000 MHz
1800 ~ 2200 MHz
Product Specifications
Parameters
Testing Frequency
Gain
S11
S22
Output IP3
Noise Figure
Output P1dB
Current
Device Voltage
Units
MHz
dB
dB
dB
dBm
dB
dBm
mA
V
Min
Typ
Max
2000
14.2
-14
-12
32.5
1.0
18
36
+4.3
Absolute Maximum Ratings
Parameters
Operating Case Temperature
Storage Temperature
Device Voltage
Operating Junction Temperature
Input RF Power (CW, 50  matched)¹⁾
Rating
-40 to 85 C
-40 to 150 C
+4.7 V
+150 C
+20 dBm
1) Please find the max. input power data from http://www.asb.co.kr/pdf/Maximum_Input_Power_Analysis.pdf
Pin Configuration
Pin No. Function
1
RF IN
4
RF OUT & Bias
2,3,5,6 GND
1/11
ASB Inc.  [e-mail]  Tel: [phone]
July 2014