ASL033 Datasheet, PDF (1/17 Pages) Advanced Semiconductor Business Inc. – 5-4000 MHz MMIC Amplifier

ASL033
5-4000 MHz MMIC Amplifier
Features
·14.6 dB Gain at 470 MHz
·17 dBm P1dB at 470 MHz
·18 dBm Output IP3 at 470 MHz
·1.2 dB NF at 470 MHz
·MTTF > 100 Years
·Single Supply
Description
ASL033 is a one-stage LNA for mobile TV receiver
low noise block. It has a low noise, high gain, and
high linearity over a wide range of frequency up to 4
GHz. It is also suitable for use in the low noise am-
plifier block of mobile wireless systems. The am-
plifier is available in an SOT-363 package and
passes the stringent DC, RF, and reliability tests.
Typical Performance
Parameters
Units
Typical
Frequency
MHz
40
170 240 470
Gain
dB
17 16.6 15.5 14.6
S11
dB
-11
-5
-4
-4
S22
Output IP3¹⁾
dB
dBm
-20
-11
19.5¹⁾ 20²⁾
-10
-10
18²⁾
18²⁾
Noise Figure
dB
1.1
1.1
1.2
1.2
Output P1dB
dBm
17
14 15.5 17
Current
mA
10
5
5
5
Device Voltage (V)
V
3.3
3
3
3
1) OIP3 is measured with two tones at an output power of -5 dBm/tone separated by 1 MHz.
2) OIP3 is measured with two tones at an output power of +0 dBm/tone separated by 1 MHz.
860
14.2
-10
-10
20²⁾
1.1
17.5
5
3
1575
15.5
-20
-15
22.5¹⁾
1.3
10.5
13
5
Package Style: SOT-363
Package Style: SOT-363
Application Circuit
·DVB-T (V/U band)
·DVB / CMMB
·DVB-T (V/U band) / 75 ohm
·10 ~ 88 MHz
·ATSC (40 ~ 900 MHz)
·TETRA
·434 MHz
·1450 ~ 1500 MHz
·GPS
Product Specifications
Parameters
Testing Frequency
Gain
S11
S22
Output IP3
Noise Figure
Output P1dB
Current
Device Voltage (V)
Units
MHz
dB
dB
dB
dBm
dB
dBm
mA
V
Min
Typ
Max
470
14.6
-4
-10
18
1.2
17
5
3
Absolute Maximum Ratings
Parameters
Operating Case Temperature
Storage Temperature
Device Voltage (V)
Operating Junction Temperature
Input RF Power (CW, 50 ohm matched)*
Rating
-40 to +85°C
-40 to +150°C
+5.5 V
+150°C
20 dBm
* Please find the max. input power data from http://www.asb.co.kr/pdf/Maximum_Input_Power_Analysis.pdf
Pin Configuration
Pin No.
1
4
2,3,5,6
Function
RF IN
RF OUT / Bias
GND
1/17
ASB Inc. · [e-mail] · Tel: [phone]
January 2012