BXA30-12S05J Datasheet, PDF (3/5 Pages) Artesyn Technologies – Embedded Power for Business-Critical Continuity

Embedded Power for
Business-Critical Continuity
Rev.12.17.07
bxa30
3 of 5
Ordering Information
INPUT
VOLTAGE
9-18 Vdc
36-75 Vdc
36-75 Vdc
36-75 Vdc
36-75 Vdc
36-75 Vdc
36-75 Vdc
36-75 Vdc
36-75 Vdc
OUTPUT
VOLTAGE
5.0 V
3.3 V
3.3 V
5.0 V
12.0 V
15.0 V
±5.0 V
±12.0 V
±15.0 V
OUTPUT
CURRENT (MAX.)
5.0 A
6.0 A
8.0 A
5.0 A
2.5 A
2.0 A
±2.5 A
±1.25 A
±1.0 A
INPUT
CURRENT ⁽¹⁾
100 mA
30 mA
30 mA
30 mA
30 mA
30 mA
30 mA
30 mA
30 mA
TYPICAL
EFFICIENCY
80%
75%
81%
80%
85%
87%
80%
84%
86%
REGULATION
LINE ⁽²⁾
LOAD ⁽³⁾
±0.2%
±0.2%
±0.2%
±0.2%
±0.2%
±0.2%
±0.4%
±1.0%
±0.2%
±0.2%
±0.2%
±0.2%
±0.4%
±0.4%
±0.4%
±0.4%
±0.4%
±0.4%
MODEL
NUMBER ^(4,6,14,15)
BXA30-12S05J
BXA30-48S3V3J
BXA30-48S3V3/8J ⁽¹¹⁾
BXA30-48S05J
BXA30-48S12J
BXA30-48S15J
BXA30-48D05J
BXA30-48D12J
BXA30-48D15J
Notes
1 Nominal, at no load.
2 Low line to high line.
3 Full load to no-load. For duals, the value stated is for balanced loads.
4 An optional internal filter is available, which will meet VDE0871 level A,
VDE0878 level A and EN55022 level A. Add the suffix ‘-F’ to the model number,
e.g. BXA30-48S12-FJ. See BXA15 and BXA30 Design Note 100.
5 For conducted noise operation of the BXA30 to VDE0871, VDE0878 and
EN55022 level B, see BXA15 and BXA30 Design Note 100.
6 For extended operating temperature, include the heatsink option, ‘-1’ in the
model number. Max. heatsink height is 12.5 mm, e.g. BXA30-48S15-1J
7 Reverse voltage protection can be implemented by putting a slow blow fuse on
the negative input rail. Rate the fuse for 48 Vdc at 1.5 A and 12 Vdc at 6 A.
8 The maximum operating ambient temperature, without derating depends on
internal power dissipation and hence efficiency and cooling method. BXA15
and BXA30 Design Note 100 provides detailed thermal calculations and design-
in details.
9 Test results to-date are 1,590,000 hours @ 46 ˚C. The MTBF figure shown
includes a calculated acceleration factor of 4.1 based on an activation energy of
-0.55 eV.
10 Visit the Artesyn website to download a copy of Design Note 100.
11 This model has the same electrical pin-out and pin pitch spacings as the
drawing on the following page. Dimensions are 76.2 x 76.2 x 14.2 mm, ±0.3
mm.
12 This product is only for inclusion by professional installers within other
equipment and must not be operated as a stand alone product.
13 If remote sense is not used, connect +sense to +vout and -sense to -vout.
14 The ‘J’ suffix indicates that these parts are Pb-free (RoHS 6/6) compliant.
TSE RoHS 5/6 (non Pb-free) compliant versions may be available on special
request, please contact your local sales representative for details.
15 NOTICE: Some models do not support all options. Please contact your local
Artesyn representative or go to www.powerconversion.com to find a suitable
alternative