SIL06 Datasheet, PDF (2/3 Pages) Artesyn Technologies – 6A Non-isolated DC/DC Converters

SIL06 Series
Single Output
DC/DC CONVERTERS 6A Non-isolated DC/DC Converters
For the most current data and application support visit www.artesyn.com/powergroup/products.htm
2
NEW Product
OUTPUT
POWER
(MAX.)
INPUT
VOLTAGE
20W
4.5-5.5VDC
30W 10.2-13.8VDC
OVP
N/A
N/A
OUTPUT
OUTPUT _CURRENT
VOLTAGE⁽¹²⁾ _(MIN.)
0.9V - 3.3V
0A
0.9V - 5.0V
0A
OUTPUT
CURRENT
(MAX.)
6A
6A
EFFICIENCY
(TYP.)
89%
91%
REGULATION
LINE LOAD
±0.2%
±0.2%
±0.5%
±0.5%
MODEL
NUMBER ⁽⁵⁾
SIL06-05SADJ-V
SIL06-12SADJ-V
Notes
1 di/dt = 10A/µs, Vin = Nom, Tc = 25°C, load change = 0.5 lo max. to 0.75
lo max. and 0.75 lo max. to 0.5 lo max.
2 Measured with external filter. See Application Note 131 for details.
3 Power up is the time from application of DC input to Power Good
enabled. Remote ON/OFF is from ON/OFF asserted high to Power Good
enabled
4 This product is only for inclusion by professional installers within other
equipment and must not be operated as a stand alone product.
5 The standard unit with the suffix '-V' is for vertical mounting. To order a
unit with horizontal mounting, please add the suffix '-H' to the model
number, e.g. SIL06-05SADJ-H.
6 Measured as per recommended set-up. Cin = 270µF (20mΩ esr max.).
Cout = 680µF (10mΩ esr max.).
7 Uses external resistor from trim to output ground. Minimum value 485Ω
for 5V model, 280Ω for 12V model. See Applications Note 131 for
details.
8 Signal line assumed <3m.
9 External input fusing recommended.
10 See Application Note 131 for operation above 50ºC.
11 See Application Note 131 for more details.
12 These models have a wide trim output. 5Vin has an output of 0.9V to
3.3V and 12 Vin has an output of 0.9V to 5V. An external resistor adjusts
the output voltage.
Ripple and Noise Specification
Model
5V input models
12V input models
Output
Voltage
0.9 to 2.5V
3.3V
0.9 to 2.5V
3.3 to 5V
Pk - Pk
30mV
40mV
40mV
50mV
RMS
15mV
15mV
20mV
20mV
PROTECTION
Short-circuit protection
Hiccup, non-latching
RECOMMENDED SYSTEM CAPACITANCE
Input capacitance (See Note 11)
270µF/20mΩ esr max.
Output capacitance (See Note 11)
680µf/10mΩ esr max.
PIN CONNECTIONS
PIN NUMBER
FUNCTION
1
Vout
2
Trim
3
Ground
4
Power Good
5
Remote ON/OFF
6
Vin
7
Mechanical support
8
Mechanical support
9
Mechanical support on
horizontal version only
CAUTION: High internal temperatures. Ensure that unit is not user
accessible.
International Safety Standard Approvals (pending)
TÜV
Please consult our website for the following items: ✔ Application Note ✔ Longform Data Sheet
www.artesyn.com
File Name: SIL06.PDF Rev: 10 Dec 2002