NLP65-3334 Datasheet, PDF (2/3 Pages) Artesyn Technologies – 50 W AC/DC Universal Input Switch Mode Power Supplies

NLP65-3334J
Single output (adjustable)
LOW POWER AC/DC POWER SUPPLIES 50 W AC/DC Universal Input Switch Mode Power Supplies
2
For the most current data and application support visit www.artesyn.com/powergroup/products.htm
OUTPUT
VOLTAGE
4.5-5.5 V
OUTPUT CURRENT
MAX ⁽⁴⁾
PEAK ⁽²⁾
FAN ⁽¹⁰⁾
10 A
12 A
11 A
RIPPLE ⁽³⁾
50 mV
TOTAL
REGULATION ⁽⁶⁾
±100 mV
OVP
6.25 V ± 0.5 V
MODEL
NUMBER ^(13,14)
NLP65-3334J
Notes
1 When the input voltage is less than 90 Vac the operating temperature
range is 0 °C to +40 °C. The ripple and regulation specifications may not
be met.
2 Peak output current lasting less than 60 seconds with duty cycle less than
5%. During peak loading, output voltage may exceed total regulation limits.
3 Figure is peak-to-peak for convection power rating. Output noise
measurements are made across a 20 MHz bandwidth using a 6 inch
twisted pair, terminated with a 10 µF electrolytic capacitor and a 0.1 µF
ceramic capacitor.
4 Maximum continuous output power must not exceed 50 W.
5 Three orthogonal axes, random vibration 10 minutes for each axes, 2.4 G
rms 5 Hz to 500 Hz.
6 Minimum load: 1 A.
7 For optimum reliability, no part of the heatsink should exceed 120 ºC, and
no semiconductor case temperature should exceed 130 ºC.
8 CAUTION: Allow a minimum of 1 second after disconnecting line power
when making thermal measurements.
N
9 This product is only for inclusion by professional installers within other
equipment and must not be operated as a stand alone product.
10 Maximum continuous output power for this model must not exceed 55
Watts with 20 CFM forced air cooling.
11 For system EMI compliance the unit must be mounted within a metal
chassis.
12 All models require a minimum mounting stand-off of 0.25 inches (6.35 mm)
in the end use product.
13 The ‘J’ suffix indicates that these parts are Pb-free (RoHS 6/6) compliant.
TSE RoHS 5/6 (non Pb-free) compliant versions may be available on
special request, please contact your local sales representative for details.
14 NOTICE: Some models do not support all options. Please contact your
local Artesyn representative or use the on-line model number search tool at
http://www.artesyn.com/powergroup/products.htm to find a suitable
alternative.
INPUT
PIN CONNECTIONS
J1
Pin 1
AC Line
Pin 2
No Pin
Pin 3
AC Neutral
J2
Pin 1
Safety Ground
OUTPUT PIN CONNECTIONS
J3
TRIPLE
Pin 1
+5V
Pin 2
+5V
Pin 3
+5V
Pin 4
Return
Pin 5
Return
Pin 6
Return
Input and output connectors
AC (J1) connector type
Molex 26-60-4030 type.
Mating connectors
AC (J1) mating connector type
Molex 09-50-3031 or equivalent with Molex
08-50-0105 or equivalent crimp terminals.
DC (J3) connector type
Molex 26-60-4060 type.
DC (J3) mating connector type
Molex 09-50-3061 with Triurcon 6838
or equivalent crimp terminals.
DERATING CURVE
Output Power (Watts)
55W
50W
20 CFM FORCED AIR COOLING
NATURAL
CONVECTION
COOLING
22W
17W
0^°C 10^°C 20^°C 30^°C 40^°C 50^°C 60^°C 70^°C
File Name: nlp65-3334.pdf Rev (02): 07 Nov 2005