BXF200 Datasheet, PDF (2/3 Pages) Artesyn Technologies – 72-132W Wide Input DC/DC Converters

BXF200 Series
Single output
DC/DC CONVERTERS 72-132W Wide Input DC/DC Converters
2
For the most current data and application support visit www.artesyn.com/powergroup/products.htm
OUTPUT
POWER
(MAX.)
100W
80W
72W
INPUT
VOLTAGE
36 to 75VDC
36 to 75VDC
36 to 75VDC
OVP
3.2VDC
2.5VDC
2.3VDC
OUTPUT
VOLTAGE
2.5V
2.0V
1.8V
INPUT
CURRENT
(MAX.)
4.4A
3.7A
3.4A
OUTPUT
CURRENT
(MAX.)
40A
40A
40A
EFFICIENCY
(TYP.)
REGULATION
LINE LOAD
76%
72%
70%
±0.10% ±0.15%
±0.10% ±0.15%
±0.10% ±0.15%
MODEL
NUMBER ⁽⁷⁾
BXF200-48S2V5L
BXF200-48S2V0L
BXF200-48S1V8L
Notes
1 Measured with 10µF tantalum capacitor and 1µF ceramic capacitor across
the output.
2 Iout = Inom; delta Iout = ±25% Iout (max), di/dt = 1A/µs.
3 Input fusing is required based on surge and maximum input current.
4 This product is only for inclusion by professional installers within other
equipment and must not be operated as a stand alone product.
5 Input reflected ripple current test set-up uses a Pi filter; 220µF, 12µH,
100µF.
6 Start-up into resistive load.
7 Active high remote on/off is available (standard product is active low),
designate with the suffix ‘H’ e.g. BXF200-48S2V5H.
8 Units should be characterised within systems. External components and
filtering required.
PROTECTION
Short circuit protection
Overvoltage protection
Thermal protection
TELECOM SPECIFICATION
Central office interface A
Continuous, automatic recovery
Latching
110°C baseplate,
automatic recovery
ETS300-132-2
PIN CONNECTIONS
PIN NUMBER
FEATURE
1
Power Good
2
Current Monitor
3
Parallel
4
Trim Adjust
5
+ Sense
6
- Sense
EXTERNAL OUTPUT TRIMMING
Output can be externally
trimmed by using the
method shown.
5
TRIM
UP
4
RT1
OR
RT2
TRIM
DOWN
6
International Safety Standard Approvals
VDE0805/EN60950/IEC950 File No. 10401-3336-0148
UL1950 File No. E136005
CSA C22.2 No. 950 File No. LR41062C
Please consult our website for the following items: Application Note
www.artesyn.com
File Name: BXF200.PDF Rev: 10 Jan 2001