SMT30C-12SADJJ_15 Datasheet, PDF (1/3 Pages) Artesyn Technologies – POWER C-Class Non-Isolated

POWER
Data Sheet
SMT30C Series
C-Class Non-Isolated
Total Power: 30 Watts
Input Voltage: 10.2 - 13.8 Vdc
# of Outputs: Single
SPECIAL FEATURES
ƒƒ 30 A current rating
ƒƒ Input voltage range:
10.2 - 13.8 Vdc
ƒƒ Output voltage range:
0.9 - 5.0 V
ƒƒ Industry-leading value
ƒƒ Cost optimized design
ƒƒ Excellent transient response
ƒƒ Output voltage adjustability
ƒƒ Path for future upgrades
ƒƒ Supports silicon voltage migration
ƒƒ Reduced design-in and qual time
ƒƒ Designed-in reliability: MTBF of >4
million hours per Telcordia SR-332
ƒƒ Available RoHS compliant
ƒƒ Two year warranty
SAFETY
ƒƒ UL, cUL CAN/CSA 22.2 No. 60950
ƒƒ UL 60690 File No. E139421
ƒƒ TÜV Product Service
(EN60950:2000)
ƒƒ Certificate No. B 04 08 19870 228
ƒƒ CB report and certificate to
IEC60950-US/6415C/UL
Electrical Specifications
Input
Input voltage ran­ ge
Nominal 12 V
Input current
Minimum load
Remote OFF
Input current (max.)
(See Note 4)
Input reflected ripple
Remote ON/OFF
Logic compatibility
ON
OFF
Start-up time
(See Note 5)
Turn ON threshold
Turn OFF threshold
Output
Voltage adjustability
Output setpoint accuracy
Line regulation
Load regulation
Min/Max load
Overshoot
Undershoot
Ripple and noise
Transient response
(See Note 2)
Power up
Remote ON/OFF
(See Note 1)
1.0% trim resistors
Low line to high line
Full load to min. load
At turn-on
At turn-off
5 Hz to 20 MHz
(See Note 2)
(See Note 3)
Current share
Full load
10.2 - 13.8 Vdc
230 mA
30 mA
13.8 A max. @ Io max.
and Vin = 10.8 V
150 mA (pk-pk)
Positive logic
>2.4 Vdc
<0.8 Vdc
<30 ms
<30 ms
9.0 Vdc
7.6 Vdc
0.9 - 5.0 Vdc
±3%
±0.2%
±1.0%
0 A/30A
1.0% max.
100 mV max.
50 mV pk-pk
14 mV rms
75 mV max. deviation
150 μs recovery to within regulation band
±10%
All specifications are typical at nominal input Vin = 12 V, full load at 25 °C unless otherwise stated.