SMT15C Datasheet, PDF (1/3 Pages) Artesyn Technologies – DC-DC CONVERTERS C Class Non-isolated

SMT15C Series
5 Vin and 12 Vin single output
DC-DC CONVERTERS C Class Non-isolated
• 15 A current rating
• Input voltage range: 4.5 Vdc to 5.5 Vdc or 10.2 Vdc to 13.8 Vdc
• Output voltage range: 0.9 Vdc - 3.3/5.0 Vdc
• Industry leading value
• Cost optimized design
• Excellent transient response
• Output voltage adjustability
• Pathway for future upgrades
• Supports silicon voltage migration
• Resulting in reduced design-in and qualification time
• Designed in reliability: MTBF of >7 million hours
per Telcordia SR-332
• Available RoHS compliant
The SMT15C series is a new high density open-frame, non-isolated converter for space sensitive
applications. Each model has a wide input range (4.5 Vdc to 5.5 Vdc or 10.2 Vdc to 13.8 Vdc)
and offers a wide 0.9 Vdc to 5.0 Vdc output voltage range with a 15 A load. An external resistor
adjusts the output voltage from its pre-set value of 0.9 V to any value up to the 5 V maximum.
Typical efficiencies for the models are 89% for the 5 V input version and 91% for the 12 V input
version. The series offers remote ON/OFF and overcurrent protection as standard. With full
international safety approvals including EN60950 and UL/cUL60950, the SMT15C reduces
compliance costs and time to market.
All specifications are typical at nominal input Vin = 12 V, full load at 25 °C unless otherwise stated
1
NEW Product
2 YEAR WARRANTY
SPECIFICATIONS
OUTPUT SPECIFICATIONS
Voltage adjustability
(See Note 7)
5 Vin
12 Vin
0.9-3.3 Vdc
0.9-5.0 Vdc
Output setpoint accuracy 1.0% trim resistors
±2.5%
Line regulation
Low line to high line
±0.2%
Load regulation
Full load to min. load
±0.5%
Min/max load
0 A/15 A
Overshoot
(at turn-on)
5 Vin
12 Vin
3.0% max.
1.0% max.
Undershoot
At turn-off
100 mV max.
Ripple and noise
5 Hz to 20 MHz
(See Note 6)
See Table
on page 2
Transient response
(See Note 1)
100 mV max. deviation
200 µs recovery to
within regulation band
INPUT SPECIFICATIONS
Input voltage range
5 Vin
12 Vin
4.5-5.5 Vdc
10.2-13.8 Vdc
Input current
Minimum load
Remote ON/OFF
65 mA
20 mA
Input current (max.)
(See Note 9)
5 Vin
12 Vin
11.5 A max. @ Io max.
8.1 A @ lo max.
Input reflected ripple
(See Note 2)
5 Vin
12 Vin
200 mA (pk-pk)
200 mA (pk-pk)
Remote ON/OFF
Logic compatibility
ON
OFF
Positive logic
>2.4 Vdc
<0.8 Vdc
Start-up time
(See Note 3)
Power-up
Remote ON/OFF
<20 ms
<20 ms
INPUT SPECIFICATIONS (CONTD.)
Turn ON threshold
5 Vin
12 Vin
Turn OFF threshold
5 Vin
12 Vin
4.5 Vdc typ.
9.3 Vdc typ.
4.3 Vdc typ.
7.8 Vdc typ.
GENERAL SPECIFICATIONS
Efficiency
See Table on page 2
Switching frequency
Fixed
200 kHz
Approvals and
standards
(See Note 4)
TÜV Product Services
IEC60950, UL/cUL60950
Material flammability
UL94V-0
Weight
14.2 g (0.5 oz)
Coplanarity
150 µm
MTBF
Telcordia SR-332
7,817,294 hours
ENVIRONMENTAL SPECIFICATIONS
Thermal performance
(See Note 10)
Operating ambient,
temperature
Non-operating
0 ºC to +80 ºC
-40 ºC to +125 ºC
PROTECTION
Short-circuit
Hiccup, non-latching
RECOMMENDED SYSTEM CAPACITANCE
Input capacitance
Output capacitance
(See Note 11) 270 µF/20 mΩ ESR max.
(See Note 11) 680 µF/10 mΩ ESR max.
File Name: smt15c.pdf Rev Rev (03): 16 Dec 2005