SMT06C-05SADJJ_15 Datasheet, PDF (1/3 Pages) Artesyn Technologies – POWER C-Class Non-Isolated

POWER
Data Sheet
SMT06C Series
C-Class Non-Isolated
Total Power: 20 Watts
Input Voltage: 4.5 - 13.8 Vdc
# of Outputs: Single
SPECIAL FEATURES
ƒƒ 6 A current rating
ƒƒ Input voltage range: 4.5 - 5.5 Vdc
or 10.2 - 13.8 Vdc
ƒƒ Output voltage: 0.9 - 3.3 / 5.0 V
ƒƒ Industry-leading value
ƒƒ Cost optimized design
ƒƒ Excellent transient response
ƒƒ Output voltage adjustability
ƒƒ Path for future upgrades
ƒƒ Supports silicon voltage migration
ƒƒ Reduced design-in and qual time
ƒƒ Designed-in reliability: MTBF of 7
million hours per Telcordia SR-332
ƒƒ Available RoHS compliant
ƒƒ Two year warranty
SAFETY
ƒƒ UL, cUL CAN/CSA 22.2 No. 60950
ƒƒ TÜV Product Service
(EN60950:2000)
ƒƒ CB report and certificate
Electrical Specifications
Input
Input voltage ran­ ge
5 V input model
12 V input model
Input current
Minimum load
Remote OFF
Input current (max.)
(See Note 8)
5 V input model
12 V input model
Input reflected ripple
(See Note 2)
5 V input model
12 V input model
Remote ON/OFF
Logic compatibility
ON
OFF
Start-up time
(See Note 3)
Power up
Remote ON/OFF
Turn ON threshold
5 Vin
12 Vin
Turn OFF threshold
5 Vin
12 Vin
Output
Voltage adjustability
(See Note 6)
5 V input model
12 V input model
Output setpoint accuracy
1.0% trim resistors
Line regulation
Low line to high line
Load regulation
Full load to min. load
Min/Max load
Overshoot
(at turn on)
5 V input model
12 V input model
Undershoot
Ripple and noise
5 Hz to 20 MHz (See Note 2)
Transient response
(See Note 1)
Deviation
4.5 - 5.5 Vdc
10.2 - 13.8 Vdc
50 mA
5 mA
5.1 A max. @ lo max.
1.6 A @ Io max.
52 mA (pk-pk)
56 mA (pk-pk)
Active high
>2.4 Vdc
<0.8 Vdc
<20 ms
<20 ms
4.5 Vdc
9.3 Vdc
4.3 Vdc
7.8 Vdc
0.9 - 3.3 Vdc
0.9 - 5.0 Vdc
±2.5%
±0.2%
±0.5%
0 A/6 A
3.0% max.
1.0% max.
100 mV max.
See table on page 2
75 mV; 150 μs recovery to within
regulation band
All specifications are typical at nominal input, full load at 25°C unless otherwise stated.