SIL80C2-00SADJ-HJ Datasheet, PDF (1/6 Pages) Artesyn Technologies – POWER C-Class Non-Isolated; 80 Amps

POWER
Data Sheet
SIL/SMT80C2 Series
C-Class Non-Isolated; 80 Amps
Total Power: 400 Watts
Input Voltage: 4.7 - 13.8 Vdc
# of Outputs: Single
SPECIAL FEATURES
ƒƒ 80 A current rating
ƒƒ Input voltage range: 4.7 - 13.8 Vdc
ƒƒ Output voltage range:
0.8375 - 5.1 V
ƒƒ Current sharing
ƒƒ Industry-leading value
ƒƒ Cost optimized design
ƒƒ Excellent transient response
ƒƒ Output voltage adjustability
ƒƒ Path for future upgrades
ƒƒ Supports silicon voltage migration
ƒƒ Reduced design-in and qual time
ƒƒ RoHS compliant
SAFETY
ƒƒ Designed to meet UL, cUL
60960-1 (EN60950)
Electrical Specifications
Input
Input voltage ra­nge
Input current
Minimum load
Remote OFF
Input current (max.)
See Note 3
Start-up time
Power up
Remote ON/OFF
Output
Output voltage
See Note 5
Output setpoint accuracy
1.0% trim resistors
Line regulation
Low line to high line
Load regulation
Full load to min. load
Min./max. load
Overshoot
At turn-on
Undershoot
At turn-off
Ripple and noise
5 Hz to 20 MHz
See Note 1
Transient response
(See Note 1, 2)
Deviation: Vin - 12 V
Vout = 2.5 V
General
Efficiency
Vo = 2,5 V, Vin = 12 V, lout = 80 A
Switching frequency
Fixed
Material flammability
Weight
MTBF
12 V @ 40 °C, 100% load
Bellcore 332
Coplanarity
4.7 - 13.8 Vdc
290 mA
30 mA
60 A @ lo max.
<12 ms
<12 ms
0.8375 - 5.1 V
±1.0%
±0.2% max.
±0.5% max.
0 A/80 A
0.5% max.
100 mV max.
35 mV
Vin = 12 V, Vout = 2.5 V
20 μs recovery to within regulation
band
93% typical
500 kHz
UL94V-0
1.6 oz.
3.7 MHrs
TBD