SIL30E Datasheet, PDF (1/4 Pages) Artesyn Technologies – DC-DC CONVERTERS Non-isolated POL Converter

SIL30E Series
12 Vin Single Output
DC-DC CONVERTERS Non-isolated POL Converter
• 30 A current rating
• Input voltage range: 8 Vdc to 14 Vdc
• Output voltage range: 0.8 Vdc to 3.63 Vdc
• Ultra high efficiency: 93% @ 12 Vin and 3.3 Vout
• Extremely low internal power dissipation
• Minimal thermal design concerns
• Designed in reliability: MTBF of 4,435,000 hours
per Telcordia SR-332
• Ideal solution where board space is at a premium
or tighter card pitch is required
• Available RoHS compliant
1
NEW Product
The SIL30E series are non-isolated dc-dc converters packaged in a single-in-line footprint
giving designers a cost effective solution for conversion from a 12 V source. The SIL30E
has a wide input range (8 Vdc to 14 Vdc) and offers a wide 0.8 Vdc to 3.63 Vdc output
voltage range with a 30 A load, which allows for maximum design flexibility and a pathway
for future upgrades. The SIL30E is designed for applications that include distributed power,
workstations, optical network and wireless applications. Implemented using state of the art
surface-mount technology and automated manufacturing techniques, the SIL30E offers
compact size and efficiencies of up to 93%.
All specifications are typical at 12 Vin and 1.5 Vout, full load at 25 °C unless otherwise stated
C_out = 100 µF
2 YEAR WARRANTY
SPECIFICATIONS
OUTPUT SPECIFICATIONS
Voltage adjustability
0.8-3.63 Vdc
Setpoint accuracy
±1.3% typ.
Line regulation
±0.2% typ.
Load regulation
±1.5% typ.
Total error band
±3.0% typ.
Minimum load
0A
Overshoot/undershoot
None
Ripple and noise
5 Hz to 20 MHz
50 mV pk-pk
25 mV rms
Temperature coefficient
±0.01%/ºC
Transient response
Slew rate = 0.5 A/µs
Vout = 1.5 V
50% to 75% load step
3% max. deviation
10 µs recovery to
within ±1.0%
Remote sense
10% Vo compensation
INPUT SPECIFICATIONS
Input voltage range
Input current
No load (max.)
Input current (max.)
Input reflected ripple
Remote ON/OFF
Start-up time
8-14 Vdc
250 mA
9.2 A max. @ Io max.
and Vout = 3.3 V
220 mA rms
(See Note 1)
20 ms
International Safety Standard Approvals
UL/cUL CAN/CSA 22.2 No. EI74104
UL 60950 File No. EI74104
TÜV Product Service (EN60950) Certificate No. B05 06 38572 055
CB report and certificate to IEC60950
EMC CHARACTERISTICS
Electrostatic discharge
Conducted immunity
Radiated immunity
EN61000-4-2, IEC801-2
EN61000-4-6
EN61000-4-3
GENERAL SPECIFICATIONS
Efficiency
@ 12 Vin, 3.3 Vout
93% typ.
Insulation voltage
Non-isolated
Switching frequency
Fixed
1.3 MHz typ.
Approvals and
standards
EN60950-1
UL/cUL60950-1
Material flammability
UL94V-0
Dimensions
(LxWxH)
50.84 x 7.80 x 12.70 mm
2.000 x 0.307 x 0.500 inches
Pin length
0.140 in (3.56 mm)
Weight
7.0 g (0.25 oz)
MTBF
Telcordia SR-332
4,435,000 hours
ENVIRONMENTAL SPECIFICATIONS
Thermal performance
Operating ambient,
temperature
Non-operating
-40 ºC to +85 ºC
-40 ºC to +125 ºC
PROTECTION
Short-circuit
Thermal
Continuous
Automatic recovery
File Name: sil30e_12.pdf Rev (02): 16 Dec 2005