SIL30C-12SADJ-VJ_15 Datasheet, PDF (1/3 Pages) Artesyn Technologies – C-Class Non-Isolated POWER

POWER
Data Sheet
SIL30C Series
C-Class Non-Isolated
Total Power: 30 Amps
Input Voltage: 10.2 - 13.8 Vdc
# of Outputs: Single
SPECIAL FEATURES
ƒƒ 30 A current rating
ƒƒ Input voltage range: 10.2 - 13.8
Vdc
ƒƒ Nominal output voltage: 0.9 - 5 V
ƒƒ Industry-leading value
ƒƒ Cost optimized design
ƒƒ Excellent transient response
ƒƒ Output voltage adjustability
ƒƒ Pathway for future upgrades
ƒƒ Supports silicon voltage migration
ƒƒ Reduced design-in and qual time
ƒƒ Designed in reliability: MTBF of
>3.9 million hours per Telcordia
SR-332
ƒƒ Current share
ƒƒ RoHS compliant
ƒƒ Two year warranty
SAFETY
ƒƒ UL, cUL CAN/CSA 22.2 No.
E139421
ƒƒ UL60950 File No. E139421
ƒƒ TÜV Product Service (EN60950)
Certificate No. B04 08 19870 228
ƒƒ CB report and certificate to
US/6415C/UL
Electrical Specifications
Input
Input voltage ra­nge
Nominal 12 V
Input current
No load
Remote OFF
Input current (max.)
See Note 4
Input reflexted ripple
See Note 2
Remote ON/OFF
Logic compatibility
ON
OFF
Start-up time
See Note 5
Turn ON threshold
Turn OFF threshold
Output
Voltage adjustability
Output setpoint accuracy
Line regulation
Load regulation
Min./max. load
Overshoot
Undershoot
Ripple and noise
5 Hz to 20 MHz
Transient response
See Note 1
Using 1.0% trim resistors
Low line to high line
Full load to min. load
At turn-on
At turn-off
See Note 2
See Note 3
Current share
Full load
10.2 - 13.8 +Vdc
230 mA
30 mA
13.8 A max. @ Io max. and Vin = 10.8 V
150 mA (pk-pk)
Logic high
>2.4 Vdc
<0.8 Vdc
Power up: 30 ms
Remote ON/OFF: 30ms
9.0 Vdc
7.6 Vdc
0.9 to 5.0 Vdc
±3.0%
±0.2%
±1.5%
0 A/30 A
1.0% max.
10 mV max.
50 mV pk-pk
15 mV rms
75 mV typical deviation
150 μs recovery to within regulation band
±10%
All specifications are typical at nominal input, full load at 25 °C, unless otherwise stated.