SIL15E-05S1V8-VJ_10 Datasheet, PDF (1/4 Pages) Artesyn Technologies – Embedded Power for Business-Critical Continuity

Embedded Power for
Business-Critical Continuity
SIL15E Series
3.0 Vin to 5.5 Vin
Single Output
Total Power: 54.5W
Input Voltage: 5.5VDC
# of Outputs: Single
Rev.12.11.08_97
SIL15E Series
1 of 5
Special Features
• 15 A current rating
• Input voltage range:
3.0 Vdc to 5.5 Vdc
• Output voltage range:
0.8 Vdc to 3.63 Vdc
• Ultra high efficiency: 95% @
5 Vin and 3.3 Vout
• Extremely low internal power
dissipation
• Minimal thermal design
concerns
• Designed in reliability: 
MTBF of >7 million hoursper
Telcordia SR-332
• Ideal solution where board
space is at a premium or tighter
card pitch is required
• Industry standard footprint and
pin out
• Available RoHS compliant
• 2 year warranty
Safety
• UL/cUL :CAN/CSA 22.2
No. E174104
• UL 60950 File No. E174104
• TÜV Product Service
(EN60950) Certificate No. B
03 10 38572
• CB report and certificate to
DE3-51686M1
Electrical Specifications
Output
Voltage adjustability:
Setpoint accuracy
Line regulation:
Load regulation:
Minimum load:
Overshoot/undershoot:
Ripple and noise:
(0-20 MHz BW)
Temperature coefficient:
Transient response:
Short circuit protection:
Thermal protection:
Input
Input voltage range:
Input current:
Input current (max):
Input current ripple:
Remote ON/OFF:
Start-up time:
± 10.0%
0.8-3.63 Vdc
± 0.4%
± 0.2%
± 1.0%
0A
None
60 mV pk-pk
25 mV rms max.
± 0.01%/ °C
60 mV max. deviation
50 µs recovery to within ± 1.0%
Continuous
Automatic recovery
3.0-5.5 Vdc
70 mA typ.
11.8 A max. @ lo max. and Vout = 3.63 V
110 mA rms
(See Note 2)
20 ms
Fixed output version
Wide trim version
No load