SIL15C Datasheet, PDF (1/3 Pages) Artesyn Technologies – 5Vin and 12Vin single output

SIL15C Series
5Vin and 12Vin single output
DC/DC CONVERTERS C Class Non-isolated
• 15A current rating
• Input voltage range: 4.5V - 5.5V or 10.2V - 13.8V
• Output voltage range: 0.9V - 5.0V
• Industry leading value
• Cost optimised design
• Excellent transient response
• Output Voltage adjustability
• Pathway for future upgrades
• Supports silicon voltage migration
• Resulting in reduced design-in and qualification time
• Designed in reliability: MTBF of >7 million hrs
per Telcordia SR-332
The SIL15C Series is a new high density open frame non-isolated converter for space-
sensitive applications. Each model has a wide input range (4.5V to 5.5V or 10.2V to
13.8V) and offer a wide 0.9V to 3.3V/5V output voltage range with a 15A load. An external
resistor adjusts the output voltage from its pre-set value of 0.9V to any value up to the
maximum allowed value for that model. Typical efficiencies are 89% for the 5V input
version and 91% for the 12V input version. The SIL15C series offers remote ON/OFF and
over-current protection as standard. With full international safety approval including
EN60950 and UL/cUL60950, the SIL15C reduces compliance costs and time to market.
All specifications are typical at nominal input, full load at 25°C unless otherwise stated
1
NEW Product
2 YEAR WARRANTY
SPECIFICATIONS
OUTPUT SPECIFICATIONS
Voltage adjustability
(See Note 5)
5V input models
12V input models
0.9V to 3.3V
0.9V to 5.0V
Output setpoint accuracy With 1.0% trim resistors
±2.5%
Line regulation
Low line to high line
±0.2% max.
Load regulation
Full load to min. load
±0.5% max.
Min/max load
0A/15A
Overshoot
(at turn on)
5V input models
12V input models
3% max.
1% max.
Undershoot
100mV max.
Ripple and noise
5Hz to 20MHz
(See Note 1)
See table
Transient response
(See Note 2)
Deviation
100mV
200µs recovery to
within regulation band
INPUT SPECIFICATIONS
Input voltage range
5V input model
12V input model
Input current
Minimum load
Remote OFF
Input current (max.)
(See Note 3)
5V input model
12V input model
Input reflected ripple
(See Note 4)
5V input model
12V input model
Remote ON/OFF
Logic compatibility
ON
OFF
Start-up time
(See Note 9)
Power up
Remote ON/OFF
4.5 to 5.5VDC
10.2 to 13.8VDC
65mA
20mA
11.5A @ Io max.
8.1A @ Io max.
200mA (pk-pk)
200mA (pk-pk)
Active high
>2.4VDC
<0.8VDC
<20ms
<20ms
INPUT SPECIFICATIONS (CONTD.)
Turn ON threshold
5Vin
12Vin
Turn OFF threshold
5Vin
12Vin
4.5VDC
9.0VDC
4.3VDC
7.5VDC
GENERAL SPECIFICATIONS
Efficiency
See Table
Switching frequency
Fixed
200kHz
Approvals and
standards (pending)
(See Note 4)
TÜV Product Services
IEC60950, UL/cUL60950
Material flammability
UL94V-0
Weight
14.2g (0.5oz)
MTBF
Telcordia SR-332
7,817,294 hours
ENVIRONMENTAL SPECIFICATIONS
Thermal performance
(See Note 8)
Operating ambient,
temperature
Non-operating
0ºC to +80ºC
-40ºC to +125ºC
PROTECTION
Short-circuit protection
Hiccup, non-latching
RECOMMENDED SYSTEM CAPACITANCE
Input capacitance
Output capacitance
(See Note 11) 270µF/20mΩ esr max.
(See Note 11) 680µF/10mΩ esr max.
International Safety Standard Approvals
TÜV
UL/cUL CAN/CSA 22.2 No. E139421
UL60950 file No. E139421
TÜV Product Service (EN60950) Certificate No. B0211 19870 205
CB report and certificate to IEC60950
File Name: SIL15C.PDF Rev: 04 Mar 2003