SIL10E Datasheet, PDF (1/3 Pages) Artesyn Technologies – DC/DC CONVERTERS

SIL10E Series
Single output
DC/DC CONVERTERS E Class Non-isolated
• 10A Current rating
• Input voltage range: 3.0V - 5.5V
• Output voltage range: 0.8V - 3.63V
• Ultra high efficiency: 95% @ 5Vin and 3.3Vout
• Extremely low internal power dissipation
• Minimal thermal design concerns
• Designed in reliability: MTBF of >7 million hours
per Telcordia SR-332
• Ideal solution where board space is at a premium
or tighter card pitch is required
• Industry standard footprint and pin out
1
NEW Product
The SIL10E series are non-isolated DC/DC converters packaged in a single-in-line footprint
giving designers a cost effective solution for conversion from either a 5V or a 3.3V source.
The SIL10E offers a range of fixed outputs and one wide trim output unit at an industry
leading 10A which allows maximum design flexibility and a pathway for future upgrades.
The SIL10E is designed for applications that include distributed power, workstations, optical
network and wireless applications. Implemented using state of the art surface mount
technology and automated manufacturing techniques, the SIL10E offers compact size and
efficiencies of up to 95%.
All specifications are typical at nominal input, full load at 25°C unless otherwise stated
2 YEAR WARRANTY
SPECIFICATIONS
OUTPUT SPECIFICATIONS
Voltage adjustability
Fixed output versions
5Vin with wide trim
3.3Vin with wide trim
±10%
3.6V to 0.8V
2.75V to 0.8V
Setpoint accuracy
±2.7%
Line regulation
±1.0%
Load regulation
±1.0%
Minimum load
0A
Overshoot/undershoot
None
Ripple and noise
0 to 20MHz BW
50mV pk-pk
25mV rms max.
Temperature co-efficient
±0.01%/ºC
Transient response
50mV max. deviation
50µs recovery to
within ±1.0%
Remote sense
10% Vo compensation
INPUT SPECIFICATIONS
Input voltage range
Input current
No load
Input current (max.)
Input current ripple
Remote ON/OFF
Start-up time
3.0 to 5.5VDC
70mA
8A max. @ Io max.
and Vout = 3.3V
65mA rms
(See Note 1)
20ms
EMC CHARACTERISTICS
Electrostatic discharge
Conducted immunity
Radiated immunity
EN61000-4-2, IEC801-2
EN61000-4-6
EN61000-4-3
GENERAL SPECIFICATIONS
Efficiency
See table
Insulation voltage
Non-isolated
Switching frequency
Fixed
300kHz typ.
Approvals and
standards
EN60950
UL/cUL60950
Material flammability
UL94V-0
Dimensions
(Vertical version)
(LxWxH)
50.8 x 7.8 x 12.7mm
2.0 x 0.31 x 0.5 inches
Pin length
Vertical 0.135 ±0.02 in (3.43 ±0.5mm)
Weight
5g (0.18oz)
MTBF
Telcordia SR-332
7,042,000
ENVIRONMENTAL SPECIFICATIONS
Thermal performance
Operating ambient,
(See Note 2)
Non-operating
-40ºC to +100ºC
-40ºC to +125ºC
PROTECTION
Short-circuit protection
Thermal protection
Continuous
Automatic recovery
International Safety Standard Approvals
TÜV
UL/cUL CAN/CSA 22.2 No. E174104
UL60950 file No. E174104
TÜV Product Service (EN60950) Certificate No. B02 12 38572 035
CB report and certificate to IEC60950
File Name: sil10e.pdf Rev: 27 Feb 2003