SIL10E-05W3V3-VJ Datasheet, PDF (1/3 Pages) Artesyn Technologies – 49.9 Watt (10 Amp) Non-Isolated DC-DC Converters

POWER
Data Sheet
SIL10E Series
49.9 Watt (10 Amp) Non-Isolated DC-DC Converters
Total Power: 49.9 Watts
Input Voltage: 3.0 - 5.5 Vdc
# of Outputs: Single
SPECIAL FEATURES
ƒƒ 10 A current rating
ƒƒ Input voltage range:
3.0 - 5.5 Vdc
ƒƒ Output voltage range:
0.8 - 3.63 V
ƒƒ Ultra-high efficiency:
96% @ 5 Vin and 3.3 Vout
ƒƒ Extremely low internal power
dissipation
ƒƒ Minimal thermal design concerns
ƒƒ Designed in reliability:
MTBF of >7 million hours per
Telcordia SR-322
ƒƒ Ideal solution where board space is
at a premium or tighter card pitch
is required
ƒƒ Industry standard footprint and pin
out
ƒƒ Available RoHS compliant
ƒƒ Two year warranty
SAFETY
ƒƒ UL, cUL CAN/CSA 22.2 No. 60950-
1-03/UL 60950-1, File No. E186249
ƒƒ TÜV Product Service (EN60950)
Certificate No. B 08 05 51485 378
ƒƒ CB report and certificate to
IEC60950, Certificate No.
DE3-51686M1
Electrical Specifications
Input
Input voltage ra­nge
Input current
No load (max.)
Input current (max.)
Input reflected ripple
Remote ON/OFF
Start-up time
Output
Voltage adjustability
(See Note 1)
Fixed output versions
5 Vin with wide trim
3.3 Vin with wide trim
Setpoint accuracy
Line regulation
Load regulation
Minimum load
Overshoot/undershoot
Ripple and noise
5 Hz to 20 MHz
Temperature co-efficient
Transient response
Remote sense
3.0 - 5.5 Vdc
70 mA
8 A max. @ Io max. and Vout = 3.3 V
65 mA rms
See Note 2
20 ms
±10%
0.8 - 3.63 Vdc
0.8 - 2.75 Vdc
±0.4%.
±0.2%
±1.0%
0A
None
50 mV pk=pk
25 mV rms max.
±0.01%/ °C
50 mV max. deviation
50 μs recovery to within ±1.0%
10% Vo compensation
Note: All specifications are typical at nominal input, full load at 25 °C unless otherwise stated.