SIL10 Datasheet, PDF (1/3 Pages) Artesyn Technologies – 8 to 33W Non-isolated DC/DC Converters

SIL10 Series
Single output
DC/DC CONVERTERS 8 to 33W Non-isolated DC/DC Converters
• Current rating of 10A
• Outputs of between 0.8V to 3.3V - fixed and flexible
• Applications for 5V or 3.3V input POL converters
• Highest power density available today (117W/in³)
• High efficiency - up to 96% achievable on 3.3 Vout
• POL converter that saves board space - vertical or horizontal
versions
• Industry standard footprint
• Remote sense and remote ON/OFF
1
NEW Product
The SIL10 series are non-isolated DC/DC converters packaged in a single-in-line footprint giving
designers a cost effective solution for conversion from either a 5V or 3.3V input to output
voltages of 0.8V to 3.3V. The SIL10 offers both fixed outputs and wide output trim range which
allows maximum design flexibility and a pathway for future upgrades. Local voltage conversion
by the SIL10 series from existing 5V or 3.3V system voltages eliminates the need for redesign of
existing power architectures when voltage requirements change. The SIL10 is designed for
applications that include distributed power, workstations, optical network and wireless
applications. Implemented using state of the art surface mount technology and automated
manufacturing techniques, the SIL10 offers compact size and efficiencies of up to 96%.
All specifications are typical at nominal input, full load at 25°C unless otherwise stated
2 YEAR WARRANTY
SPECIFICATIONS
OUTPUT SPECIFICATIONS
Voltage adjustability
Fixed output versions
5Vin with wide trim
3.3Vin with wide trim
±10%
3.6V to 0.8V
2.75V to 0.8V
Setpoint accuracy
±2.7%
Line regulation
±1.0%
Load regulation
±1.0%
Minimum load
0A
Overshoot/undershoot
None
Ripple and noise
0 to 20MHz BW
50mV pk-pk
25mV rms max.
Temperature co-efficient
±0.01%/ºC
Transient response
50mV max. deviation
50µs recovery to
within ±1.0%
Remote sense
10% Vo compensation
INPUT SPECIFICATIONS
Input voltage range
Input current
No load
Input current (max.)
Input current ripple
Remote ON/OFF
Start-up time
3.0 to 5.5VDC
70mA
8A max. @ Io max.
and Vout = 3.3V
65mA rms
(See Note 3)
20ms
EMC CHARACTERISTICS
Electrostatic discharge
Conducted immunity
Radiated immunity
EN61000-4-2, IEC801-2
EN61000-4-6
EN61000-4-3
GENERAL SPECIFICATIONS
Efficiency
See table
Insulation voltage
Non-isolated
Switching frequency
Fixed
300kHz typ.
Approvals and
standards (pending)
EN60950
UL/cUL60950
Material flammability
UL94V-0
Dimensions
(LxWxH)
50.8 x 7.8 x 12.7mm
2.0 x 0.31 x 0.5 inches
Pin length
Vertical 0.135 ±0.02 in (3.43 ±0.5mm)
Weight
5g (0.18oz)
MTBF
Telecordia 332
7,042,000
ENVIRONMENTAL SPECIFICATIONS
Thermal performance
Operating ambient,
(See Note 4)
Non-operating
-40ºC to +100ºC
-40ºC to +125ºC
International Safety Standard Approvals
TÜV
UL/cUL CAN/CSA 22.2 No. E174104
UL60950 file No. E174104
TÜV Product Service (EN60950)
Certificate No. TBC. CB report and certificate to IEC60950
File Name: SIL10.PDF Rev: 02 Jan 2003