SHP5 Datasheet, PDF (1/3 Pages) Artesyn Technologies – Single and dual output 3 to 5 Watt Wide input DC/DC converters

[ 2 YEAR WARRANTY ]
SHP5 SERIES
Single and dual output
• 3 to 5 Watts in DIL package
• 32 models including 2.1V and 3.3V outputs
• Wide input ranges 4.5-9V, 9-18V, 18-36V and 36-72V
• EN55022 conducted emissions level B
• Operating temperature range -25°C to +50°C
• Input voltage range to ETS300-132-2
The SHP5 Series of DC/DC converters is designed to offer the optimum cost/benefit
power solution for a wide variety of applications including public and private
telecommunications, industrial systems and process and test equipment. The series
consists of 32 models in a DIL package with input voltages of 4.5-9VDC, 9-18VDC, 18-
36VDC and 36-72VDC. The SHP5 offers standard 5V, 12V and 15V in single and dual
outputs. 2.1V and 3.3V single outputs are also available suitable for low voltage logic
applications. Optional filtering to EN55022 level B conducted emissions and low output
ripple minimize design-in time, cost and eliminate the need for external components.
SPECIFICATION All specifications are typical at nominal input, full load at 25°C unless otherwise stated
OUTPUT SPECIFICATIONS
Voltage accuracy
±2.0%
Line regulation
LL to HL, all outputs
±0.1%
Load regulation
Min. load to full load
±0.3%
Cross regulation
Asymmetrical load
25% / 100% FL
4.0% max.
Minimum load
2.1V, 3.3V, 5V
Single 12V, 15V
Dual
50mA max.
80mA max.
80mA max.
Overshoot
At start-up
3.0% max.
Ripple and noise
Transient response
20MHz bandwidth
25% load step
1.0% pk-pk, max.
75mV rms
±10% max. dev.,
1ms recovery
to within ±1.0%
Temperature coefficient
±0.02%/°C
Short circuit protection 1 minute
Automatic recovery
INPUT SPECIFICATIONS
Input voltage range
5VDC nominal, FL
12VDC nominal, FL
24VDC nominal, FL
48VDC nominal, FL
4.5 to 9VDC
9 to 18VDC
18 to 36VDC
36 to 72VDC
Input filter
Suffix ‘-F’
See Note 1
Common mode
and Pi type
Input current
See table
Input reflected ripple Single output
Dual and triple outputs
20mA
20mA
Start-up time
5ms
PAGE 1
EMC CHARACTERISTICS
Conducted emissions
Radiated emissions
EN55022, EN55011, FCC
Suffix ‘-F’ versions,
See Note 1
EN55022
Level B
Level B
GENERAL SPECIFICATIONS
Efficiency
78% typ.
Isolation voltage
Input/output
500VDC
Isolation resistance
Input/output
10⁸Ω
Isolation capacitance Input/output
1nF
Switching frequency Fixed
200 to 250kHz
Approvals and
standards (pending)
Safety
VDE0805, EN60950
IEC950, UL1950
CSA C22.2 No. 950
Case material
Black coated, metal case
Material flammability
UL94V-0
Weight
16g (0.56oz)
MTBF
MIL-HDBK-217F
250,000 hours
ENVIRONMENTAL SPECIFICATIONS
Thermal performance
Operating ambient -25°C to +50°C
(See derating curve)
Extended temp.,
option, See Note 3
-40°C to +50°C
Non-operating amb. -25°C to +95°C
Case
+95°C max.
Derating
See derating curve
Cooling
Free air convection
cooled
Relative humidity
Non-condensing
30% to 95%
Altitude
Operating
Non operating
10,000 feet max.
40,000 feet max.
Vibration
5Hz to 500Hz
2.5G rms (approx.)