PTV12010 Datasheet, PDF (1/5 Pages) Artesyn Technologies – DC-DC CONVERTERS POLA Non-isolated

PTV12010
12 Vin single output
DC-DC CONVERTERS POLA Non-isolated
1
• 8 A output current
• 12 V input voltage
• Wide-output voltage adjust
• 1.2 Vdc to 5.5 Vdc for suffix ‘W’ and
0.8 Vdc to 1.8 Vdc for suffix ‘L’
• Auto-track™ sequencing*
• Pre-bias start-up
• Efficiencies up to 93%
• Output ON/OFF inhibit
• Vertical through-hole mounting
• Point-of-Load-Alliance (POLA) compatible
• Undervoltage lockout
• Available RoHS compliant
The PTV12010 is a non-isolated dc-dc converter from Artesyn under the Point of Load
Alliance (POLA) standard. The vertical mounting option of the PTV12010 module provides
performance in less than 20% of the space that is required by alternative solutions. The
Auto-Track™ feature provides for sequencing between multiple modules, a function,
which is becoming a necessity for powering advanced silicon including DSP’s, FPGA’s
and ASIC’s requiring controlled power-up and power-down. The PTV12010 has an input
voltage of 10.8 Vdc to 13.2 Vdc and offers a wide 1.2 Vdc to 5.5 Vdc for suffix ‘W’ and
0.8 Vdc to 1.8 Vdc for suffix ‘L’ output voltage range with up to 8 A output current, which
allows for maximum design flexibility and a pathway for future upgrades.
All specifications are typical at nominal input, full load at 25 °C unless otherwise stated
C_in = 100 µF and 10 µF (Ceramic), C_out = 0 µF
NEW Product
2 YEAR WARRANTY
SPECIFICATIONS
OUTPUT SPECIFICATIONS
Voltage adjustability
(See Note 4)
Suffix ‘W’
Suffix ‘L’
1.2-5.5 Vdc
0.8-1.8 Vdc
Setpoint accuracy
(See Note 8)
±2.0% Vo
Line regulation
±10 mV typ.
Load regulation
±12 mV typ.
Total regulation
(See Note 8)
±3.0% Vo
Minimum load
0A
Ripple and noise
20 MHz bandwidth
Suffix ‘W’
Suffix ‘L’
20 mV pk-pk
15 mV pk-pk
Temperature co-efficient -40 ºC to +85 ºC
±0.5% Vo
Transient response
(See Note 5)
70 µs recovery time
Overshoot/undershoot 100 mV
INPUT SPECIFICATIONS
Input voltage range
(See Note 3)
10.8V-13.2 Vdc
Input standby current
10 mA typ.
Remote ON/OFF
(See Note 1)
Positive logic
Undervoltage lockout (Increasing)
9.5 V typ.
Track input current
Pin 5 (See Notes 6 and 7) -0.13 mA
EMC CHARACTERISTICS
Electrostatic discharge
Conducted immunity
Radiated immunity
EN61000-4-2, IEC801-2
EN61000-4-6
EN61000-4-3
GENERAL SPECIFICATIONS
Efficiency
See Tables on page 2
Insulation voltage
Non-isolated
Switching frequency
Suffix ‘W’
Suffix ‘L’
250-400 kHz
200-300 kHz
325 kHz typ.
250 kHz typ.
Approvals and
standards
EN60950
UL/cUL60950
Material flammability
UL94V-0
Dimensions
(L x W x H) 22.86 x 8.38 x 10.16 mm
0.90 x 0.330 x 0.400 in
Weight
2.6 g (0.09 oz)
MTBF
Telcordia SR-332
5,000,000 hours
ENVIRONMENTAL SPECIFICATIONS
Thermal performance
(See Note 2)
Operating ambient,
temperature
Non-operating
-40 ºC to +85 ºC
-40 ºC to +125 ºC
PROTECTION
Overcurrent
Auto reset
16 A typ.
International Safety Standard Approvals
UL/cUL CAN/CSA-C22.2 No. 60950
File No. E174104
TÜV Product Service (EN60950) Certificate No. B 04 06 38572 044
CB Report and Certificate to IEC60950, Certificate No.
US/8292/UL
*Auto-track™ is a trade mark of
Texas Instruments
File Name: ptv12010w.pdf Rev (02): 19 Dec 2005