|
PTH12010 Datasheet, PDF (1/5 Pages) Artesyn Technologies – DC-DC CONVERTERS POLA Non-isolated | |||
|
PTH12010
12 Vin single output
DC-DC CONVERTERS POLA Non-isolated
1
⢠12 A output current
⢠12 V input voltage
⢠Wide-output voltage adjust
⢠1.2 Vdc to 5.5 Vdc for suffix âWâ and
0.8 Vdc to 1.8 Vdc for suffix âLâ
⢠Auto-track⢠sequencing*
⢠Margin up/down controls
⢠Efficiencies up to 94%
⢠Output ON/OFF inhibit
⢠Output voltage sense
⢠Point-of-Load-Alliance (POLA) compatible
⢠Available RoHS compliant
The PTH12010 is a next generation series of non-isolated dc-dc converters offering some
of the most advanced POL features available in the industry. The primary new feature
provides for sequencing between multiple modules, a function, which is becoming a
necessity for powering advanced silicon including DSPâs, FPGAâs and ASICâs requiring
controlled power-up and power-down. Other industry leading features include margin
up/down controls and efficiencies up to 94%. The PTH12010 has an input voltage of
10.8 Vdc to 13.2 Vdc and offers a wide 1.2 Vdc to 5.5 Vdc output voltage range with up to
12 A output current, which allows for maximum design flexibility and a pathway for future
upgrades.
All specifications are typical at nominal input, full load at 25 °C unless otherwise stated
Cin = 560 µF, Cout = 0 µF
NEW Product
2 YEAR WARRANTY
SPECIFICATIONS
OUTPUT SPECIFICATIONS
Voltage adjustability
(See Note 4)
Suffix â-Wâ
Suffix â-Lâ
1.2-5.5 Vdc
0.8-1.8 Vdc
Setpoint accuracy
±2.0% Vo
Line regulation
±10 mV typ.
Load regulation
±12 mV typ.
Total regulation
±3.0% Vo
Minimum load
0A
Ripple and noise
20 MHz bandwidth
Suffix â-Wâ
Suffix â-Lâ
25 mV pk-pk
25 mV pk-pk
Temperature co-efficient -40 ºC to +85 ºC
±0.5% Vo
Transient response
(See Note 5)
70 µs recovery time
Overshoot/undershoot 100 mV
Margin adjustment
±5.0% Vo
INPUT SPECIFICATIONS
Input voltage range
(See Note 3)
Input current
No load
Remote ON/OFF
(See Note 1)
Start-up time
Undervoltage lockout
Track input voltage
Pin 8 (See Note 6)
10.8-13.2 Vdc
10 mA typ.
Positive logic
1 V/ms
9.0-9.5 V typ.
±0.3 Vin
International Safety Standard Approvals
UL/cUL CAN/CSA-C22.2 No. 60950-1-03/UL 60950-1,
File No. E174104
TÃV Product Service (EN60950) Certificate No. B 04 06 38572 044
CB Report and Certificate to IEC60950, Certificate No.
US/8292/UL
EMC CHARACTERISTICS
Electrostatic discharge
Conducted immunity
Radiated immunity
EN61000-4-2, IEC801-2
EN61000-4-6
EN61000-4-3
GENERAL SPECIFICATIONS
Efficiency
See Tables on page 2
Insulation voltage
Non-isolated
Switching frequency
Suffix â-Wâ
Suffix â-Lâ
300 kHz to 400 kHz
200 kHz to 300 kHz
Approvals and
standards
EN60950
UL/cUL60950
Material flammability
UL94V-0
Dimensions
(L x W x H) 34.80 x 15.75 x 9.00 mm
1.370 x 0.620 x 0.354 in
Weight
5 g (0.18 oz)
MTBF
Telcordia SR-332
7,092,000 hours
ENVIRONMENTAL SPECIFICATIONS
Thermal performance
(See Note 2)
Operating ambient, -40 ºC to +85 ºC
temperature
Non-operating
-40 ºC to +125 ºC
MSL (âZâ suffix only)
JEDEC J-STD-020C
Level 3
PROTECTION
Short-circuit
Auto reset
20 A typ.
*Auto-track⢠is a trade mark of
Texas Instruments
File Name: pth12010.pdf Rev (07): 19 Dec 2005
|
▷ |