|
PTH05050 Datasheet, PDF (1/4 Pages) Artesyn Technologies – DC-DC CONVERTERS POLA Non-isolated | |||
|
PTH05050
5 Vin single output
DC-DC CONVERTERS POLA Non-isolated
⢠6 A output current
⢠5 V input voltage
⢠Wide-output voltage adjust (0.8 Vdc to 3.6 Vdc)
⢠Auto-track⢠sequencing*
⢠Pre-bias start-up capability
⢠Efficiencies up to 95%
⢠Output ON/OFF inhibit
⢠Output voltage sense
⢠Point-of-Load-Alliance (POLA) compatible
⢠Available RoHS compliant
1
NEW Product
The PTH05050 is a next generation series of non-isolated dc-dc converters offering
some of the most advanced POL features available in the industry. The primary new
feature provides for sequencing between multiple modules, a function, which is
becoming a necessity for powering advanced silicon including DSPâs, FPGAâs and
ASICâs requiring controlled power-up and power-down. Other industry leading features
include pre-bias start-up capability and efficiencies up to 95%. The PTH05050 has an
input voltage of 4.5 Vdc to 5.5 Vdc and offers a wide 0.8 Vdc to 3.6 Vdc output voltage
range with up to 6 A output current, which allows for maximum design flexibility and a
pathway for future upgrades.
All specifications are typical at nominal input, full load at 25 °C unless otherwise stated
Cin = 100 µF, Cout = 0 µF
2 YEAR WARRANTY
SPECIFICATIONS
OUTPUT SPECIFICATIONS
Voltage adjustability
(See Note 4)
0.8-3.6 Vdc
Setpoint accuracy
±2.0% Vo
Line regulation
±10 mV typ.
Load regulation
±12 mV typ.
Total regulation
±3.0% Vo
Minimum load
0A
Ripple and noise
20 MHz bandwidth
20 mV pk-pk
Temperature co-efficient -40 ºC to +85 ºC
±0.5% Vo
Transient response
(See Note 5)
70 µs recovery time
Overshoot/undershoot 100 mV
INPUT SPECIFICATIONS
Input voltage range
(See Note 3)
Input current
No load
Remote ON/OFF
(See Note 1)
Start-up time
Undervoltage lockout
Track input voltage
Pin 2 (See Note 6, 7)
4.5-5.5 Vdc
10 mA typ.
Positive logic
1 V/ms
3.7-4.3 Vdc typ.
±0.3 Vin
EMC CHARACTERISTICS
Electrostatic discharge
Conducted immunity
Radiated immunity
EN61000-4-2, IEC801-2
EN61000-4-6
EN61000-4-3
GENERAL SPECIFICATIONS
Efficiency
(See Efficiency Table)
95% max.
Insulation voltage
Non-isolated
Switching frequency
550 kHz to 650 kHz
Approvals and
standards
EN60950
UL/cUL60950
Material flammability
UL94V-0
Dimensions
(L x W x H) 22.10 x 12.57 x 8.50 mm
0.870 x 0.495 x 0.335 in
Weight
2.9 g (0.10 oz)
MTBF
Telcordia SR-332
7,092,000 hours
ENVIRONMENTAL SPECIFICATIONS
Thermal performance
(See Note 2)
Operating ambient, -40 ºC to +85 ºC
temperature
Non-operating
-40 ºC to +125 ºC
MSL (âZâ suffix only)
JEDEC J-STD-020C
Level 3
PROTECTION
Short-circuit
Auto reset
12 A typ.
International Safety Standard Approvals
UL/cUL CAN/CSA-C22.2 No. 60950-1-03/UL 60950-1,
File No. E174104
TÃV Product Service (EN60950) Certificate No. B 04 06 38572 044
CB Report and Certificate to IEC60950, Certificate No.
US/8292/UL
*Auto-track⢠is a trade mark of
Texas Instruments
File Name: pth05050.pdf Rev (06): 16 Dec 2005
|
▷ |