PM500CE Datasheet, PDF (1/2 Pages) Artesyn Technologies – Single, dual and triple output 1 to 10.5 Watt AC/DC encapsulated modules

[ 2 YEAR WARRANTY ]
PM500CE SERIES
Single, dual and triple output
• Encapsulated package
• 1 to 10.5W units
• 230VAC input (115VAC version, see PM500)
• PCB mounting
• Short circuit protection
• EN55022, EN55011 conducted emissions level B
• EN61000-4-2, -3, -4, -5, -6 immunity compliant
• Meets EN60950
The PM500CE series is an encapsulated, board mountable linear AC/DC power
module with the CE mark to demonstrate compliance with the Low Voltage
Directive for European applications. The series has single, dual and triple output
models with industry standard output configurations operating from an input
voltage of 230VAC making the PM500CE series suitable for a wide range of low
power PCB applications. The PM500CE series includes 1W to 10.5W modules.
Each module has short circuit protection and the 5V outputs also have
overvoltage protection. Conservative design and rating of these modules
results in reliable operation and long life. The PM500CE design is a low
emissions design with tightly regulated outputs making the series especially
suitable for test, measurement and instrumentation equipment.
SPECIFICATION All specifications are typical at nominal input, full load at 25°C unless otherwise stated
OUTPUT SPECIFICATIONS
Voltage accuracy
Voltage adjustability
Line regulation
Load regulation
Temperature coefficient
Overvoltage protection 5V outputs only
(See Note 4)
Output power limit
Typical
Short circuit protection Switch off/on
INPUT SPECIFICATIONS
Input voltage range
Input frequency range (See Note 2)
Safety ground
leakage current
±1.0% max.
Yes
See table
See table
±0.02%/°C
6.2V typical
130% to 200% FL
100% to 200% FL
230VAC ±10%
47Hz to 400Hz
<3.5mA @ 50Hz
EMC CHARACTERISTICS
Conducted emissions
Radiated emissions
ESD air
ESD contact
Surge
Fast transients
Radiated immunity
Conducted immunity
EN55022
EN55022
EN61000-4-2, level 3
EN61000-4-2, level 4
EN61000-4-5, level 3
EN61000-4-4, level 3
EN61000-4-3, level 3
EN61000-4-6, level 3
Level B
Level B
Perf. criteria 1
Perf. criteria 1
Perf. criteria 1
Perf. criteria 1
Perf. criteria 1
Perf. criteria 1
GENERAL SPECIFICATIONS
Efficiency
40% typical
Isolation voltage
3000VAC
Isolation capacitance
50pF
Approvals and
standards
(See Note 5)
Meets EN60950
Case material
UL94V-0
Non-conductive
black plastic
Weight
Case B1
Case B2
Case B3
340g (12oz)
408g (14.4oz)
635g (22.4oz)
MTBF (See Note 3)
710,000 hours
ENVIRONMENTAL SPECIFICATIONS
Thermal performance
Operating amb.
–25°C to +71°C
Non-operating amb. –25°C to +85°C
Derating, 50°C to 71°C
2.5%/°C
Cooling
Free-air convection
cooled
Relative Humidity
Non-condensing
20% to 95% RH
PAGE 88