PM500 Datasheet, PDF (1/3 Pages) Artesyn Technologies – Single, dual and triple output 1 to 10.5 Watt AC/DC encapsulated modules

[ 2 YEAR WARRANTY ]
VM500 Series only
PM500 and VM500 SERIES
Single, dual and triple output
Recommended for new design-ins
• OVP on 5V outputs
• Split bobbin wound
• PCB mounting
• UL and CSA approved
• 115, 220 and 240VAC input
• Short circuit protection
• The VM500 Series has EN60950 approval
These encapsulated, PC-mountable linear power modules feature 23 single
output, 14 dual output and 13 triple output models for a wide variety of printed
circuit board applications. The 5V output of all models have overvoltage
crowbar protection as a standard feature. For maximum safety, all power
transformers are split bobbin wound, rather than layer wound, to give total
isolation with low coupling capacitance between primary and secondary.
Conservative design and rating of these modules results in reliable operation
and long life. Standard input voltage is 115VAC; other optional inputs are 220
and 240VAC. Most models are available in standard and alternate pin
configurations for second sourcing applications. This series includes 5 sub-
miniature modules for lower power applications where minimum circuit board
space is available.
SPECIFICATION All specifications are typical at nominal input, full load at 25°C unless otherwise stated
OUTPUT SPECIFICATIONS
Voltage accuracy
±1.0% max.
Voltage adjustability PM529 and PM563 only
Yes
Line regulation
See table
Load regulation
See table
Temperature coefficient
±0.02%/°C
Overvoltage protection See table on facing
6.2V typical
page for relevant models
Output power limit
Typical
130% to 200% FL
Short circuit protection Switch off/on
100% to 200% FL
INPUT SPECIFICATIONS
Input voltage range
See tables below
Input frequency range PM500, See Note 3
VM500
47Hz to 400Hz
47Hz to 63Hz
Safety ground
leakage current
Less than 3.5mA
@ 50Hz
GENERAL SPECIFICATIONS
Efficiency
40% typical
Isolation voltage
PM series, no suffix
PM series, suffix D
PM series, suffix K
VM534D
700VAC
2500VAC
2500VAC
3000VAC
Switching frequency
Linear
Approvals and
standards
Safety VM534D
IEC950
Safety PM5xx CSA22.2-143/-154, UL478
Case material
Non-conductive
black plastic
Weight
Case A
Case B1 (incl. VM534D)
Case B2
Case B3
Case H
181g (6.4oz)
340g (12oz)
408g (14.4oz)
635g (22.4oz)
227g (8oz)
MTBF
See Note 4
710,000 hours
ENVIRONMENTAL SPECIFICATIONS
Thermal performance
Operating amb.
–25°C to +71°C
Non-operating amb. –25°C to +85°C
Derating, 50°C to 71°C
2.5%/°C
Cooling
Free-air convection
Relative Humidity
Non-condensing
20% to 95% RH
Vibration
Encapsulated
PM500 INPUT VOLTAGE
115±10VAC
220±20VAC
240±20VAC
SUFFIX
(NONE)
D
K
VM534D INPUT VOLTAGE
200 to 233VAC
SUFFIX
D
PAGE 1