NLS110-9602 Datasheet, PDF (1/3 Pages) Artesyn Technologies – LOW TO MEDIUM POWER AC/DC POWER SUPPLIES

NLS110-9602
Quad output
LOW TO MEDIUM POWER AC/DC POWER SUPPLIES 80-110W AC/DC Universal Input Switch Mode Power Supplies 1
• 7.0 x 4.25 x 1U package
• Overvoltage and short circuit protection
• 110W with 20CFM
• 90VAC to 264VAC universal input range
• EN55022 conducted emissions level B, radiated
emissions level A
• UL, VDE and CSA safety approvals
• CE mark
The NLS110-9602 is a 110W universal input AC/DC power supply on a 7 x 4.25 inch
card. The NLS110-9602 has proven itself to be highly reliable and versatile product for
a wide range of communication and industrial applications, with a very high peak
current capability on each output for drive and motor applications. The NLS110-9602
provides 80W of output power with free air convection cooling which can be boosted to
110W with 20CFM of air. Standard features include overvoltage and short circuit
protection. The NLS110-9602 with full international safety approval and the CE mark,
meets conducted emissions EN55022 level B. The NLS110-9602 is designed for use in
low power data networking, computer, telecom and industrial applications such as
servers, thermal printers, storage devices, vending machines and POS equipment.
All specifications are typical at nominal input, full load at 25°C unless otherwise stated
2 YEAR WARRANTY
SPECIFICATIONS
OUTPUT SPECIFICATIONS
Total regulation
Line and load
Rise Time
At turn-on
Transient response
Temperature coefficient
Overvoltage protection +5.1V
Short circuit protection Cyclic operation
(See table)
1.0s, max.
(See table)
±0.02%/°C
125%, ±10%
Yes with auto
recovery
INPUT SPECIFICATIONS
Input voltage range
Universal input
Input frequency range
Input surge current
(cold start)
120VAC
230VAC
Safety ground
leakage current
120VAC, 60Hz
230VAC, 50Hz
Input current
120VAC @ 80W
120VAC @ 110W
230VAC @ 80W
230VAC @ 110W
Input fuse
UL/IEC127
90 to 264VDC
47Hz to 440Hz
18A max.
35A max.
0.45mA
0.75mA
0.95A rms
1.35A rms
0.53A rms
0.75A rms
F3.15A H, 250VAC
EMC CHARACTERISTICS ⁽¹¹⁾
Conducted emissions
Radiated emissions
Harmonic current
emission correction
ESD air
ESD contact
Surge
Fast transients
Radiated immunity
Conducted immunity
EN55022, FCC part 15
EN55022, FCC part 15
EN61000-3-2
EN61000-4-2
EN61000-4-2
EN61000-4-5
EN61000-4-4
EN61000-4-3
EN61000-4-6
Level B
Level A
Compliant
Level 3
Level 3
Level 3
Level 3
Level 3
Level 3
GENERAL SPECIFICATIONS
Hold-up time
120VAC @ 60Hz
35ms @ 80W
25ms @ 110W
Efficiency
120VAC @ 110W
70% min.
Isolation voltage
Input/output
Input/chassis
3000VAC
1500VAC
Approvals and
standards
EN60950, VDE0805, IEC950
UL1950, CSA C22.2 No. 950
Weight
383g (13.5 oz.)
MTBF (@ 25˚C)
MIL-HDBK-217F 220,000 hours min.
ENVIRONMENTAL SPECIFICATIONS ^(6,8)
Thermal performance
Operating ambient,
0°C to +50°C
(see derating curve)
Non-operating
–40°C to +85°C
+50°C to +70°C,
Derate to
amb. convection cooled
50% load
0°C to +50°C,
80W
amb. convection cooled
0°C to +50°C ambient,
110W
150LFM forced air
Peak (0°C to +50°C, 60s) (See Note 4)
Relative humidity
Non-condensing
5% to 95% RH
Altitude
Operating
Non-operating
10,000 feet max.
30,000 feet max.
Vibration (See Note 7) 5Hz to 500Hz
2.4G rms peak
Shock
per MIL-STD-810E
516.4 Part IV
File Name: NLS110.PDF Rev: 12 June 2001