NLP65-3300J Datasheet, PDF (1/3 Pages) Artesyn Technologies – 33 W AC/DC Universal Input Switch Mode Power Supplies

NLP65-3300J
Single output
LOW POWER AC/DC POWER SUPPLIES 33 W AC/DC Universal Input Switch Mode Power Supplies
1
• 5.0 x 3.0 inch card and 1.26 inch package (1U applications)
• EN61000-3-2 compliance option (HCC)
• Overvoltage and short circuit protection
• EN55022, EN55011 conducted emissions level B
• EN61000-4-2, -3, -4, -5, -6 immunity compliant
• Enclosure and cover kit options
• Available RoHS compliant
The NLP65-3300J is a 33 W universal input ac-dc power supply on a 5 x 3 inch card with a
maximum component height of 1.26 inches for use in 1U applications. This model has the
option of input harmonic current correction in the same package size making the series ideal
for product designs that will need to comply with EN61000-3-2 legislation. The NLP65-3300J
provides 33 W of output power with free air convection cooling. The NLP65, with full
international safety approval and the CE mark, meets conducted emissions EN55022 level B
and has immunity compliance to EN61000-4-2, -3, -4, -5, -6. The series is available in a
factory installed enclosure with an IEC connector and output connector on flying leads plus a
cover kit for self-installation is also available as an accessory. The NLP65 series is designed
for use in low power data networking, computer and telecom applications such as hubs,
routers, POS terminals, internet servers, cable modems and PABX’s. This list is not exclusive
as the generic feature set of the NLP65 series with industry standard output configurations
provides a solution for most low power applications including many industrial applications.
All specifications are typical at nominal input, full load at 25 °C unless otherwise stated
2 YEAR WARRANTY
SPECIFICATIONS
OUTPUT SPECIFICATIONS
Total regulation
Line and load
±3.0% max.
Rise time
At turn-on
1.0 s, max. @ 230 Vac
Transient response
Main output
25% step
at 0.1 A/µs
5.0% or 165 mV
max. dev., 1 ms max.
recovery to 1%
Temperature coefficient
±0.02%/°C
Overvoltage protection
125%, ±10%
Short circuit protection Cyclic operation
Yes, indefinite
Minimum output current Single
(See Note 6)
INPUT SPECIFICATIONS
Input voltage range
(See Note 1)
Nominal
85-264 Vac
120-370 Vdc
Input frequency range
47-63 Hz
Input surge current
(cold start)
120 Vac
230 Vac
17 A max.
32 A max.
Safety ground
leakage current
120 Vac, 60 Hz
230 Vac, 50 Hz
0.7 mA
1.4 mA
Inrush current
230 Vac
32 A max.
Input current
120 Vac, with PFC
230 Vac, with PFC
120 Vac, without PFC
230 Vac, without PFC
0.5 A rms
0.25 A rms
0.7 A rms
0.4 A rms
Input fuse
UL/IEC127
250 Vac S 3.15 A
EMC CHARACTERISTICS ^{(4, 10)}
Conducted emissions
Radiated emissions
ESD air
ESD contact
Surge
Fast transients
Radiated immunity
Conducted immunity
EN55022, FCC part 15, (Note 3) Level B
EN55022, FCC part 15
Level A
EN61000-4-2, level 3 Perf. criteria 1
EN61000-4-2, level 4 Perf. criteria 1
EN61000-4-5, level 3 Perf. criteria 1
EN61000-4-4, level 3 Perf. criteria 1
EN61000-4-3, level 3 Perf. criteria 2
EN61000-4-6, level 3 Perf. criteria 2
GENERAL SPECIFICATIONS
Hold-up time
230 Vac, 50 Hz
78 ms @ 33 W
Efficiency
64% typical
Isolation voltage
Input/output
Input/chassis
3000 Vac
1500 Vac
Switching frequency
Fixed
100 kHz, ±5 kHz
Approvals and
standards
(See Notes 9 and 11)
EN60950, VDE0805, IEC950
UL1950, CSA C22.2 No. 950
EN41003 (BABT)
Weight
283 g (10 oz)
MTBF
MIL-HDBK-217F 150,000 hours min.
ENVIRONMENTAL SPECIFICATIONS
Thermal performance
(See Notes 1 and 2)
Operating temperature 0 °C to +50 °C
Non-operating
-40 °C to +85 °C
50 °C to 70 °C ambient,
convection cooled
0.65 W/°C
Peak (0 °C to +50 °C, 60 s) See table
Relative humidity
Non-condensing
5% to 95% RH
Altitude
Operating
Non-operating
10,000 feet max.
30,000 feet max.
Vibration (See Note 5) 5-500 Hz
2.4 G rms peak
Shock
per MIL-STD-810E
516.4 Part IV
File Name: nlp65-3300j.pdf Rev (02): 08 Nov 2005