NLP250CJ Datasheet, PDF (1/2 Pages) Astec America, Inc – Place the cover over the NLP250 as shown

POWER
Installation Notes
NLP250CJ
Cover Accessory Kit
NLP250CJ will fit the NLP250
power supplies.
MATERIALS
ƒƒ One (1) cover
ƒƒ Four (4) M3x8 mm countersunk
screws
NLP250CJ Enclosure
GAP PAD
ON MAIN
TRANSFORMER
M3 C'SINK SCREW
WITH 8mm LONG (4X)
Installation Instructions and Notes
1. Place the cover over the NLP250 as shown.
2. Align the cover to the U-bracket countersink holes.
3. Secure four (4) countersink screws provided with in kit as shown.
4. Overall dimensions: 7” (177.8 mm) x 4” (101.6 mm) x 1.6” (40.64 mm).
5. When using this enclosure, ensure that relevant safety standards (e.g., EN60950) are
complied with, in respect to creepage and clearance distances, and distances through
insulation.
6. All dimensions are in inches (mm)