NLP150H Datasheet, PDF (1/4 Pages) Artesyn Technologies – Single, dual, triple and quad output

Patent No. 5600546 and 5652700
[ 2 YEAR WARRANTY ]
NLP150H SERIES
Single, dual, triple and quad output
• 6.5 x 3.0 x 3.06 package (2U applications)
• Smallest industry footprint
• EN61000-3-2 compliant
• Overvoltage and short circuit protection
• 150W with 150LFM
• EN55022, EN55011 conducted emissions level B
• EN61000-4-2, -3, -4, -5, -6 immunity compliant
• UL, VDE and CSA safety approvals
The NLP150H series is a 150W universal input AC/DC power supply in a 6.5 x 3.0 x
3.06 inch package for use in 2U applications. The series has the smallest standard
125 to 150W footprint in the industry, has input harmonic current emission correction
as standard and has 3.3V models to support the semiconductor industry's transition
from 5V to lower operating voltages. The NLP150H provides 150W of output power
with 150LFM of air. Standard features include overvoltage and short circuit protection.
The series has an enclosure with fan option that does not change the overall package
size. The series, with full international safety approval and the CE mark, meets
conducted emissions EN55022 level B and complies to EN61000-4-2,-3,-4, -5 and -6
immunity standards. The NLP150H series is designed for use in low power data
networking, computer and telecom applications such as hubs, routers, file servers,
graphic workstations, storage peripherals and PABX's.
SPECIFICATION All specifications are typical at nominal input, full load at 25°C unless otherwise stated
OUTPUT SPECIFICATIONS
Total regulation
(Line and load)
Single outputs
Multiple outputs (5V, 3.3V)
Auxiliary outputs
±2.0%
±2.0%
±5.0%
Rise time
At turn-on
250ms, max.
Transient response
Main output
25% step
at 0.1A/µs
5.0% or 250mV
max. dev., 1ms max.
recovery to 1%
Temperature coefficient
±0.02%/°C
Overvoltage protection Single outputs and 125% of nominal
multi outputs 1 and 2 ±10% tolerance
Short circuit protection
Continuous
Minimum output current
Yes, see table
Remote sense
Outputs 1 and 2
0.5V max. drop
INPUT SPECIFICATIONS
Input voltage range
Universal input
90 to 264VAC
Input frequency range
47Hz to 63Hz
Input surge current
(cold start)
120VAC
230VAC
19A max.
38A max.
Safety ground
leakage current
120VAC, 60Hz
230VAC, 50Hz
0.7mA
1.4mA
Input current
120VAC
2.4A max.
Input fuse
UL, IEC approved
250VAC 6.3A
EMC CHARACTERISTICS ⁽⁷⁾
Conducted emissions
Radiated emissions
ESD air
ESD contact
Surge
Fast transients
Radiated immunity
Conducted immunity
EN55022, FCC part 15
EN55022, FCC part 15
EN61000-4-2, level 3
EN61000-4-2, level 4
EN61000-4-5, level 3
EN61000-4-4, level 3
EN61000-4-3, level 3
EN61000-4-6, level 3
Level B
Level A
Perf. criteria 1
Perf. criteria 1
Perf. criteria 1
Perf. criteria 1
Perf. criteria 1
Perf. criteria 1
PAGE 58
GENERAL SPECIFICATIONS
Hold-up time
120VAC, 60Hz
16ms @ 150W
Efficiency
72% typical
Isolation voltage
Input/output
Input/chassis
3000VAC
1500VAC
Switching frequency Fixed
100kHz, ±10kHz
Approvals and
standards
(See Note 6)
VDE0805, EN60950
IEC950, UL1950
CSA C22.2 No. 950
Weight
Open-frame
With cover and fan
680g (24 oz)
900g (31.77 oz)
Size
Open-frame
6.5 x 3.0 x 3.06 in.
With cover and fan 7.5 x 3.0 x 3.10 in.
MTBF
MIL-HDBK-217F
> 200,000 hours
ENVIRONMENTAL SPECIFICATIONS
Thermal performance
0°C to +50°C ambient,
150LFM forced air
150W
Non-operating
-40°C to +85°C
+50°C to +70°C,
150LFM forced air
Derate to
50% load
Peak (0°C to +50°C, 60s) (See Note 2)
Relative humidity
Non-condensing
5% to 95% RH
Altitude
Operating
Non-operating
10,000 feet max.
30,000 feet max.
Vibration (See Note 4) 5Hz to 500Hz
2.4G rms peak
Shock
per MIL-STD-810E
516.4 Part IV