NFS42 Datasheet, PDF (1/2 Pages) Artesyn Technologies – Triple output 40 to 50 Watt AC/DC universal input switch mode power supplies

[ 2 YEAR WARRANTY ]
NFS42 SERIES
Triple output
• 6.3 x 3.9 x 1.5 package (1U applications)
• Overvoltage and short circuit protection
• 40W with free air convection
• EN55022, EN55011 conducted emissions level B
• UL, VDE, CSA and BABT safety approvals
The NFS42 series is a 40W universal input AC/DC power supply on a 6.3 x 3.9
inch card with a maximum component height of 1.5 inches for use in 1U
applications. The NFS42 series is available in three standard models with a
lower component count and larger footprint than most standard 40W models to
ensure greater reliability. The NFS42 provides 40W of output power with free air
convection cooling which can be boosted to 50W with 20CFM of air. Standard
features include overvoltage and short circuit protection. The series, with full
international safety approval and the CE mark, meets conducted emissions
EN55022 level B. The NFS42 series is designed for use in low power telecom
and industrial applications such as PABX's, industrial PC's and machine control.
SPECIFICATION All specifications are typical for 110VAC input, 40 watts output at 25°C unless otherwise stated
OUTPUT SPECIFICATIONS
Line regulation
LL to HL, FL
Main output (Output 1)
Output 2
Output 3
±1.0%
±1.0%
±0.1%
Total regulation
(See Note 5)
Main output (Output 1)
Output 2
Output 3
±3.0%
±5.0%
±5.0%
Overshoot/undershoot At turn-on
0%
Transient response
+5V (1.5A to 3A)
500mV max. dev.,
500µs recovery
Temperature coefficient All Outputs
±0.03%/°C, max.
Overvoltage protection +5V output
6.25V ±0.75V
Output power limit
Primary power 75W input power limit
limited
50W output power limit
Short circuit protection
Yes, with auto-restart
Minimum output current (See Note 8)
4 Watts
INPUT SPECIFICATIONS
Input voltage range
Universal input
85 to 264VAC
120 to 370VDC
Input frequency range
47 to 440Hz
Maximum input
surge current
110VAC, cold start
230VAC, cold start
7.5A
15A
Safety ground
leakage current
110VAC, 60Hz
230VAC, 50Hz
0.66mA max.
1.2mA max.
International Safety Standard Approvals
VDE0805/EN60950/IEC950/IEC1010 File No. 10401-3336-1036
Licence No. 1485, 1650
UL1950 File No. E136005
CSA C22.2 No. 950 File No. LR41062C
Certificate No. PS/603173
PAGE 1
EMC CHARACTERISTICS
Conducted emissions
Radiated emissions
ESD air
ESD contact
Surge
Fast transients
Radiated immunity
Conducted immunity
EN55022, FCC part 15
EN55022, FCC part 15
EN61000-4-2, level 3
EN61000-4-2, level 4
EN61000-4-5, level 3
EN61000-4-4, level 3
EN61000-4-3, level 3
EN61000-4-6, level 3
Level B
Level B
Perf. criteria 2
Perf. criteria 1
Perf. criteria 1
Perf. criteria 1
Perf. criteria 2
Perf. criteria 1
GENERAL SPECIFICATIONS
Hold-up time
110VAC input
230VAC input
16ms
100ms
Efficiency
110/230VAC input,
40W output
70% typical
65% min.
Isolation voltage
Input/output
Input/chassis
3000VAC
1500VAC
Switching frequency Variable
20kHz, min.
Approvals and
standards
(See Note 10)
VDE0805, EN60950, IEC950
IEC1010, UL1950, BABT
CSA C22.2 No. 950
Weight
400g (14oz)
MTBF (See Note 8)
MIL-HDBK-217E, 25°C 230,000 hours
ENVIRONMENTAL SPECIFICATIONS
Thermal performance
(See Notes 6, 7)
0°C to 50°C ambient,
convection cooled
40W
0°C to 50°C ambient,
20CFM forced air
50W
50°C to 70°C ambient Derate linearly
to 50% load
Peak (0°C to 50°C, max. 30s) 50W
Operating range,
see derating curve
0°C to +70°C
Non-operating
-40°C to +85°C
Relative humidity
Non-condensing
5% to 95% RH
Altitude
Operating
Non-operating
10,000 feet max.
30,000 feet max.
Vibration (See Note 9) 5Hz to 500Hz
2.4G rms approx.