NFS110 Datasheet, PDF (1/3 Pages) Artesyn Technologies – 80-110W AC/DC Universal Input Switch Mode Power Supplies

NFS110 Series
Single and quad output
LOW TO MEDIUM POWER AC/DC POWER SUPPLIES 80-110W AC/DC Universal Input Switch Mode Power Supplies 1
• 7.0 x 4.25 x 1.8 inch package
• Overvoltage and short circuit protection
• 110W with 20CFM
• Adjustable outputs
• EN55022, EN55011 conducted emissions level B
• UL, VDE and CSA safety approvals
• CE mark
The NFS110 series is a 110W universal input AC/DC power supply on a 7 x 4.25 inch
card. The NFS110 series has four single and three quad output models and has proven
itself to be highly reliable and versatile product for a wide range of communication and
industrial applications, with a very high peak current capability on each output for drive
and motor applications. The NFS110 provides 80W of output power with free air
convection cooling which can be boosted to 110W with 20CFM of air. Standard
features include overvoltage and short circuit protection. The series, with full
international safety approval and the CE mark, meets conducted emissions EN55022
level B. The NFS110 series is designed for use in low power data networking,
computer, telecom and industrial applications such as servers, thermal printers, storage
devices, vending machines and POS equipment.
All specifications are typical at nominal input, full load at 25°C unless otherwise stated
2 YEAR WARRANTY
SPECIFICATIONS
OUTPUT SPECIFICATIONS
Voltage adjustability
+5.1V output on multi’s
5.1V single output
12V single output
15V single output
24V single output
±3.0%
±3.0%
12V to 14V
15V to 18V
24V to 30V
Line regulation
LL to HL, FL
All outputs on all units
±0.1% max.
Overshoot/undershoot At turn-on
0%
Temperature coefficient All outputs
±0.02%/°C
Overvoltage protection
Multi output 5.1V only
5.1V single
12V single
15V single
24V single
6.25V±0.75V
6.25V±0.75V
15.75V±1.0V
22V±1.5V
33V±2.5V
Output power limit
Primary power
limited
Pin max. 160W
Pout min. 110W
Minimum output current (See Note 13)
0A
Short circuit protection
Burst mode operation
INPUT SPECIFICATIONS
Input voltage range
Input frequency range
Input surge current
Safety ground
leakage current
230VAC
110VAC, 50Hz
230VAC, 50Hz
85 to 264VAC
120 to 370VDC
47Hz to 440Hz
35A
0.2mA, max.
0.4mA, max.
EMC CHARACTERISTICS
Conducted emissions
Radiated emissions
ESD air
ESD contact
Surge
Fast transients
Radiated immunity
Conducted immunity
EN55022, FCC part 15
EN55022, FCC part 15
EN61000-4-2, level 3
EN61000-4-2, level 4
EN61000-4-5, level 3
EN61000-4-4, level 3
EN61000-4-3, level 3
EN61000-4-6, level 3
Level B
Level A
Perf. criteria 1
Perf. criteria 1
Perf. criteria 1
Perf. criteria 1
Perf. criteria 2
Perf. criteria 1
GENERAL SPECIFICATIONS
Hold-up time
Efficiency
Isolation voltage
Switching frequency
Approvals and
standards
(See Note 12)
Weight
MTBF (See Note 9)
110VAC @ 80W
110VAC @ 110W
230VAC @ 80W
230VAC @ 110W
35ms
17ms
140ms
100ms
Multiple outputs
+5.1V single
12V and 15V singles
24V single
70% typical
70% typical
72% typical
75% typical
Input/output
Input/chassis
3000VAC
1500VAC
At 100 Watts output
At zero load
20 to 70kHz
100 to 250kHz
VDE0805, EN60950, IEC950
IEC1010, UL1950
CSA C22.2 No. 950
Singles
Multiple outputs
550g (19.4oz)
600g (21.2oz)
MIL-HDBK-217E
125,000 hours
ENVIRONMENTAL SPECIFICATIONS
Thermal performance
(See Notes 9, 10)
Operating, see curve
0°C to +70°C
Non-operating
–40°C to +85°C
0°C to +50°C,
amb. convection cooled
80W
+50°C to +70°C,
Derate 2W/°C
amb. convection cooled
0°C to +50°C,
20CFM forced air
110W
+50°C to +70°C,
20CFM forced air
Derate
2.75W/°C
Peak, 0°C to +50°C,
max. 60 seconds
110W
Relative humidity
Non-condensing
5% to 95% RH
Altitude
Operating
Non-operating
10,000 feet max.
40,000 feet max.
Vibration (See Note 11) 5Hz to 500Hz
2.4G approx.
File Name: NFS110.PDF Rev: 01 Jan 2000