MHP10 Datasheet, PDF (1/3 Pages) Artesyn Technologies – Single and dual output 10 Watt Wide input DC/DC converters

[ 2 YEAR WARRANTY ]
MHP10 SERIES
Single and dual output
• 2 x 1 x 0.4 inch package
• 12.5 Watts/in³ power density
• 32 models including 3.3VDC and 2.1VDC
• Designed to meet EN60950
• Indefinite short circuit protection
• Optional remote ON/OFF
• Optional trim output
The MHP10 series of DC/DC converters, comprising 32 different models, has
been designed for a wide range of applications including communications,
industrial systems and mobile battery powered systems. Packing 10 Watts of
power into a 2 x 1 x 0.4 inch package, with efficiencies as high as 80% the
MHP10 has wide input ranges of 4.5-9VDC, 9-18VDC, 18-36VDC and 36-
72VDC and is available in both single and dual output versions. Other features
include indefinite short circuit protection with automatic recovery and remote
on/off, all of which minimize the need for external circuitry and make the MHP10
a recommended component in distributed power systems.
SPECIFICATION All specifications are typical at nominal input, full load at 25°C unless otherwise stated
OUTPUT SPECIFICATIONS
Voltage adjustability See Note 3
±10%
Line regulation
LL to HL, all outputs
±0.1%
Load regulation
ML to FL
Single outputs
Dual outputs
±0.1%
±1.0%
Cross regulation
Asymmetrical load
25% / 100% FL
5.0% max.
Voltage accuracy
±2.0%
Minimum load
2.1V, 3.3V, 5V
Single 12V, 15V
Duals: each output
50mA max.
80mA max.
10% FL
Overshoot
At start-up
3.0% max.
Ripple and noise
Transient response
20MHz bandwidth 1.5% pk-pk, max.
20mV rms
25% load step ±10% typ. max. dev.,
0.5ms recovery
to within ±1.0%
Temperature coefficient
±0.02%/°C
Short circuit protection Hiccup mode
See Note 5
Continuous
automatic recovery
INPUT SPECIFICATIONS
Input voltage range
5VDC, nominal, FL
12VDC nominal, FL
24VDC nominal, FL
48VDC nominal, FL
4.5 to 9VDC
9 to 18VDC
18 to 36VDC
36 to 72VDC
Input filter
Pi filter
Input current
See table
Input reflected ripple Single output
Dual outputs
200mA
200mA
Start-up time
500ms
INPUT SPECIFICATIONS CONTINUED
Remote ON/OFF
Logic compatibility
ON
OFF
CMOS/TTL, See Note 4
3.5VDC min. or open
0.8VDC max.
GENERAL SPECIFICATIONS
Efficiency
78% typ.
Isolation voltage
Input/output
500VDC
Isolation capacitance Input/output
1nF
Switching frequency Fixed
200 to 275kHz
Approvals and
standards (pending)
Safety VDE0805, EN60950, IEC950
UL1950, CSA C22.2 No. 950
Case material
Black coated, metal case
Material flammability
UL94V-0
Weight
27g (0.95oz)
MTBF
MIL-HDBK-217F
300,000 hours
ENVIRONMENTAL SPECIFICATIONS
Thermal performance
Operating ambient -25°C to +60°C
(See derating curve)
Extended temp.,
option, See Note 1
-40°C to +60°C
Non-operating amb. -40°C to +95°C
Case
+95°C max.
Derating
See derating curve
Cooling Free air convection cooled
Relative humidity
Non-condensing
30% to 95%
Altitude
Operating
Non operating
10,000 feet max.
40,000 feet max.
Vibration
5Hz to 500Hz
2.5G rms (approx.)
PAGE 1